Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Oil

Engine/Gearbox questions and discussion
EG_H22
Posts: 364
Joined: Sun Sep 02, 2012 7:43 pm
My Generation: 5G

Oil

Post by EG_H22 » Mon Jan 21, 2013 9:56 pm

Just wondering what oils good to use.
What you lot use

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Jan 21, 2013 10:08 pm

:facepalm: :worms:

This one will go on forever...

I used to use fully synthetics in everything, but decided they can be a bit too aggressive for old engines, so I use a good semi-synthetic on n/a engines now instead (still fully synthetic on turbo's).

Comma Eurolite's 10-40's been my staple for the last 4-5 years.


Castrol can drokk right off after they slowly reduced pack size while keeping price the same over the years and then even changed magnatec from fully to semi without telling anyone! (think they've changed it back now?)

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Post by RattyMcClelland » Mon Jan 21, 2013 10:14 pm

Comma = rebranded halfords pap. :|

Gulf comp 10w40.
Image

EG_H22
Posts: 364
Joined: Sun Sep 02, 2012 7:43 pm
My Generation: 5G

Post by EG_H22 » Mon Jan 21, 2013 10:21 pm

Hmm i was ment to put like 10 40 and what not.

My bad mate

User avatar
A1ex
Posts: 3189
Joined: Fri Jan 27, 2012 7:43 pm
My Generation: 5G

Post by A1ex » Mon Jan 21, 2013 10:28 pm

Mine is living on this at the mo;

http://www.opieoils.co.uk/p-68898-fuchs ... e-oil.aspx

With the extra power it gets too hot for the 10W 40 when you give it some
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K :D

User avatar
ziyaan
Posts: 823
Joined: Mon Jan 30, 2012 1:56 am
My Generation: 0G
Location: Bradford

Post by ziyaan » Tue Jan 22, 2013 12:55 pm

learn about oil grade

User avatar
h10ndr
Posts: 819
Joined: Mon Sep 13, 2010 7:07 pm
My Generation: 4G
Location: West Yorkshire
Has thanked: 1 time
Been thanked: 10 times
Contact:

Post by h10ndr » Tue Jan 22, 2013 2:33 pm

FUCHS TITAN GT1 5W-40 XTL - Best I have tried so far - but MOTUL 5W-40 XCESS is good.
Tim
2004 S2000 GT Berlina Black
SOLD 1992 JDM-BB1UKSPEC-B545P-H22A7-U2Q7-P72 NEPTUNE RTP
RIP 1995 UKDM-BB1-Pacific Blue Pearl
http://www.s2000-parts.com

Profile

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Tue Jan 22, 2013 11:55 pm

RattyMcClelland wrote:Comma = rebranded halfords pap. :|
Other way round.

And don't hear any bad reviews about either Tbh..?

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Wed Jan 23, 2013 12:00 am

Should add, in my CX turbo's (despite their age) I use Shell Helix Ultra 5W-40.

The oil in those runs well hot and the garage my dad used to get his serviced at would only use that cause they'd learnt it was the only oil their 6R4 and rs200's wouldn't munch for breakfast!

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Post by RattyMcClelland » Wed Jan 23, 2013 12:25 am

Yer other way round.
I used to use the Comma 5w50 in my S before it blew and i partially blame that oil for it blowing. I burnt so much oil as it was too thin.
Image

Post Reply

Return to “Engine / GearBox”