Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

H22 Valve Cover Gasket Part Number Request

Engine/Gearbox questions and discussion
User avatar
CARRisma
Posts: 902
Joined: Tue May 01, 2012 11:30 am
My Generation: 5G
Location: Horley, Surrey
Has thanked: 20 times
Been thanked: 38 times
Contact:

H22 Valve Cover Gasket Part Number Request

Post by CARRisma » Sun Jul 28, 2013 7:40 pm

My PC's PSU has died so I'm unable to access the Honda EPC. Can someone do me a favour? Can someone give me the Honda part number for the rubber gasket which goes around the edge of the valve cover and also the 4 seals around the spark plug orifices. I'm having to access this site via my mobile but will be able to use a PC at work tomorrow.
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).
Image

User avatar
Ted
Posts: 2765
Joined: Sat Jan 18, 2014 5:44 pm
My Generation: 4G
Location: about 26 miles away from where I was
Been thanked: 3 times

Post by Ted » Sun Jul 28, 2013 7:48 pm

i had some delivered on friday, not cheap either. £22.50 for the gasket and £17.75 for the seals. can get the part numbers tomorrow for you when i go back to work.

taz8520
Posts: 513
Joined: Fri Nov 11, 2011 3:05 pm
My Generation: 5G
XBOX GamerTag: taz8520
Location: SE London - (Bexleyheath, Kent)

Post by taz8520 » Sun Jul 28, 2013 7:52 pm

From Lings

PFKL274150 PACKING, CYLINDER HEAD COVER £22.26
PFKL274195 PACKING B, HEAD COVER £4.67 x 4 £18.68

http://www.lingshondaparts.com/honda_ca ... k_03=22012
Image

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Sun Jul 28, 2013 8:35 pm

The lings part numbers are ling specific I think (so you can't use them to get the part number and then ring somewhere else to order it)?

User avatar
vanzep
Supporter 2016
Posts: 7142
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 305 times
Been thanked: 505 times

Post by vanzep » Sun Jul 28, 2013 9:34 pm

you can get the rocker cover gasket set from any motor factor or from ebay
Gasket kits made by BGA for H22 their part number is BGA RK5363. Should cost you around £20. Thats for the full kit gasket.spark plug seals ,rubber washers with metal caps.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
Pushki
Supporter 2015
Posts: 2635
Joined: Sat Aug 07, 2010 9:21 pm
My Generation: 4G
PSN GamerTag: Luigi_Black
Location: Bluff Creek
Has thanked: 2 times
Been thanked: 10 times

Post by Pushki » Sun Jul 28, 2013 9:59 pm

CARRisma wrote:Can someone give me the Honda part number for the rubber gasket which goes around the edge of the valve cover and also the 4 seals around the spark plug orifices.
Rocker Cover Gasket = 12341-P13-000 
Spark Plug Seals = 12342-PT2-000 (each)
Image
ImageImageImage

User avatar
CARRisma
Posts: 902
Joined: Tue May 01, 2012 11:30 am
My Generation: 5G
Location: Horley, Surrey
Has thanked: 20 times
Been thanked: 38 times
Contact:

Re: H22 Valve Cover Gasket Part Number Request

Post by CARRisma » Sun Jul 28, 2013 10:43 pm

Hmmm, I wonder if Blueprint make them.
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).
Image

User avatar
Merlin
Moderator
Posts: 12393
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 68 times
Been thanked: 303 times

Post by Merlin » Mon Jul 29, 2013 9:01 am

taz8520 wrote:From Lings

PFKL274150 PACKING, CYLINDER HEAD COVER £22.26
PFKL274195 PACKING B, HEAD COVER £4.67 x 4 £18.68

http://www.lingshondaparts.com/honda_ca ... k_03=22012
@taz8520 to get the proper Honda part numbers from Lings you have to delete _pfk in the url ;)

I used the same kit Vanzep is on about. I am very pleased with it and good value.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
CARRisma
Posts: 902
Joined: Tue May 01, 2012 11:30 am
My Generation: 5G
Location: Horley, Surrey
Has thanked: 20 times
Been thanked: 38 times
Contact:

Post by CARRisma » Mon Jul 29, 2013 10:08 am

Just gone and bought the BGA RK5363 kit:

Image

£16.?? through Amazon (was cheaper than eBay) :) Slightly cheaper than Honda and looks like I get the 8 washers as well!
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).
Image

User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Post by nucleustylzlude » Mon Jul 29, 2013 10:16 am

That's a good price. BGA are good. Nice find. :D

Post Reply

Return to “Engine / GearBox”