Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Japspeed exhaust system £50 delivered.

Got some things for sale? Put them in this section
User avatar
ADS1
Supporter 2014
Posts: 447
Joined: Mon Jan 30, 2012 10:19 pm
My Generation: 4G
Location: Plymouth, Devon

Japspeed exhaust system £50 delivered.

Post by ADS1 » Tue Aug 05, 2014 8:39 pm

Cat back japspeed exhaust system, was on my bb4 for about 3 years. Still in good condition. Good solid system, uk spec, but will fit jdm, using uk cat/decat.£35 collected (Tavistock, Devon) or £50 delivered.ImageImageImage

Tailpipe is 4.5 inch, slightly mis-shaped, but hardly noticable when fitted.ImageImage
Last edited by ADS1 on Sat Aug 09, 2014 7:41 pm, edited 1 time in total.

agp pete
Posts: 3
Joined: Sat Aug 02, 2014 12:14 am
My Generation: 5G

Re: Japspeed exhaust system £50 delivered.

Post by agp pete » Tue Aug 05, 2014 9:18 pm

Hi will this fit 5th gen with out modifying and how loud is it?

Thanks pete

User avatar
ADS1
Supporter 2014
Posts: 447
Joined: Mon Jan 30, 2012 10:19 pm
My Generation: 4G
Location: Plymouth, Devon

Post by ADS1 » Tue Aug 05, 2014 10:09 pm

I am not sure if it fits 5th gen, someone may be able to answer that? It is fairly loud to be honest.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2484 times
Been thanked: 307 times

Post by wurlycorner » Tue Aug 05, 2014 10:21 pm

Back hangers need to be modified to fit a 5th gen I think.

agp pete
Posts: 3
Joined: Sat Aug 02, 2014 12:14 am
My Generation: 5G

Post by agp pete » Tue Aug 05, 2014 11:25 pm

Moding the hangers not to bad just the noise i live on the same road as 2 copers an i in an out at stupid times haha so need to keep it sensible. Il have a look if there is a pice to go in end that you can buy to quite it down abit.

User avatar
sproggy29
Supporter 2014
Posts: 224
Joined: Tue Jun 24, 2014 8:59 pm
My Generation: 5G
XBOX GamerTag: xxchytacxx
Location: West Midlands

Post by sproggy29 » Wed Aug 06, 2014 7:15 am

Just the hangers? do I bend them to fit or need to have a welder do it? if its something I can do I will take it for my 5th as the box I bought is utter dung.................

(not a huge fan of my noisy neighbours either so it'll be good for the early starts :P :twisted: )

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2484 times
Been thanked: 307 times

Post by wurlycorner » Wed Aug 06, 2014 8:43 am

It would be a welding job, they need to swap side IIRC @Donald

User avatar
Donald
Supporter 2015
Posts: 9894
Joined: Sun Jun 12, 2011 10:17 pm
My Generation: 0G
Location: Earth 3.0
Been thanked: 7 times

Post by Donald » Wed Aug 06, 2014 8:46 am

Yeah one hanger just needs moving on the backbox.

User avatar
sproggy29
Supporter 2014
Posts: 224
Joined: Tue Jun 24, 2014 8:59 pm
My Generation: 5G
XBOX GamerTag: xxchytacxx
Location: West Midlands

Post by sproggy29 » Wed Aug 06, 2014 3:39 pm

Donald wrote:Yeah one hanger just needs moving on the backbox.
and the rest of it would fit?

User avatar
ADS1
Supporter 2014
Posts: 447
Joined: Mon Jan 30, 2012 10:19 pm
My Generation: 4G
Location: Plymouth, Devon

Post by ADS1 » Wed Aug 06, 2014 9:19 pm

agp pete wrote:Moding the hangers not to bad just the noise i live on the same road as 2 copers an i in an out at stupid times haha so need to keep it sensible. Il have a look if there is a pice to go in end that you can buy to quite it down abit.
You can get a silencer bung for this. It did come with one, but i got rid of it :lol:

Post Reply

Return to “Parts for sale”