various exhaust gubbins

Post by **vanzep** » Fri May 22, 2015 11:34 am

Having a clear out of stuff i dont need and have gathered together a few exhaust fitting odds and ends.
Parts as shown in pic.
Price £10 collected from Edinburgh or postage at cost.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri May 22, 2015 1:55 pm

What are the crush rings sized to fit?
Or do you know what size they are? (ID, OD and thickness)

Post by **vanzep** » Fri May 22, 2015 6:04 pm

crush ring sizes - no idea what they are sized to fit - got them off a guy who said they were for his honda prelude - he had a 2.3 and 2.2vtec - but obviously i didnt think Honda used crush rings....
measured using digital vernier calipers
Arvins Pack Pt no. Ansa/Rosi410059
od 61mm
id 53mm
Thk 4.3mm dia

White Pack Pt no.HAG17X

od 59.2mm
id 49.25mm
Thk 5mm dia

The exhaust clamp is 60mm or 2 3/8 zinc&yellow pass

The exhaust rubber (ive used one of them for the mid section hangers - i think)
Arvin In pack pt no. Ansa/Rosi 42014 or Timax HAR18AE
The other exhaust rubber came of a 4th gen custom back box - think it was used on the hanger just at the back bumper so it could sit slightly lower that oem Has part number stamped on it EEP-6637.13 or this might just be a mark from the tooling/mold.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri May 22, 2015 6:16 pm

Crush rings are oem fitment on each end of the downpipe on ludes

for the sizes - I'll try and see over the weekend what size crush rings the 3g uses and if they're the right ones, I'll be back in touch!

Post by **vanzep** » Fri May 22, 2015 6:18 pm

no worries wurly and seeing its you i would include p&p free

just if you need them.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri May 22, 2015 6:28 pm

Post by **vanzep** » Fri May 22, 2015 7:46 pm

BB4 owners have got to stick together you know

There so few of us left

Post by **vanzep** » Thu Jun 04, 2015 1:24 pm

sold