Brake disc question

kris_aka_edu · Post by **kris_aka_edu** » Mon Jul 29, 2013 6:05 pm

I haven't got a bloody measuring tape! Nooooo. Looks like I'll have to just order the pads and disk from ebay. Only trouble is which ones of them fits?! God knows!

mercutio · Post by **mercutio** » Mon Jul 29, 2013 6:20 pm

you need 282mm by 28mm vented 4 x 114.3 if you have a 4g vtec

Post by **4thgenphil** » Mon Jul 29, 2013 6:39 pm

mercutio wrote:you need 282mm by 28mm vented 4 x 114.3 if you have a 4g vtec

you sure?

i thought it was 282x23

282x28 is for an NSX

(not that i spent way to long looking into this)

kris_aka_edu · Post by **kris_aka_edu** » Mon Jul 29, 2013 7:24 pm

I don't mind having NSX brake disks at least I know it will stop the car!

Post by **4thgenphil** » Mon Jul 29, 2013 7:43 pm

kris_aka_edu wrote:I don't mind having NSX brake disks at least I know it will stop the car!

you'll need the calipers and carriers to fit over them

kris_aka_edu · Post by **kris_aka_edu** » Mon Jul 29, 2013 8:20 pm

Hmm bit expensive, only available in US too.

Post by **4thgenphil** » Mon Jul 29, 2013 8:24 pm

who would have thought super car parts are expensive?

i had a set sold them to a lucky gent on here

kris_aka_edu · Post by **kris_aka_edu** » Mon Jul 29, 2013 8:26 pm

Theres a lude with them already on? Bet that stops well!

Post by **4thgenphil** » Mon Jul 29, 2013 8:51 pm

kris_aka_edu wrote:Theres a lude with them already on? Bet that stops well!

mine did, the other hasnt fitted them yet

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Jul 29, 2013 9:33 pm

If you want to do a comparison between the brake parts, the mtec brakes website gives all the dimensions IIRC (so you could look up the model of the discs and pads above and see if there's any size differences compared to the lude).