Wingmirror question

Post by **Donald** » Thu Jul 03, 2014 11:37 am

Should work fine.

I had a dodgy switch for my heated mirrors but the electric adjust worked fine still. There are two separate connectors so mine not working at the switch would be equal to just not having it connected.

If that makes sense.

Post by **Merlin** » Thu Jul 03, 2014 11:39 am

Donald wrote:I had a dodgy switch for my heated mirrors

My one is playing up

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Jul 03, 2014 11:56 am

If not, you can swap the connectors - they open up, so do that to both of them, pull the pins out of the new mirror connector, pull the pins out of the old mirror connector, move the old mirror connector over to the new mirror and push the pins into it (in the right order) leaving the heated mirror wires out.

Post by **Donald** » Thu Jul 03, 2014 12:23 pm

duckface wrote:Really, 2 separate connectors? Could only see one "plug" coming out of the mirrors

Yep same as mine mate. I imagine there is an extra wire(s) on mine though but it all ends in the same connector.