Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
White F reg 3g pre-face B20A7 4WS auto breaking
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21266
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2089 times
- Been thanked: 257 times
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21266
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2089 times
- Been thanked: 257 times
Some info for 3g owners;
The chassis legs are open at the front and is a nasty trap for water and crap that gets blown in there.
Same both sides, but this is under the battery tray;
Also to update... Passenger window motor and drivers side door mirror sold.
Sorry I had to dash off @VTECfan otherwise I could have given you a hand to get the window motor in.
The chassis legs are open at the front and is a nasty trap for water and crap that gets blown in there.
Same both sides, but this is under the battery tray;
Also to update... Passenger window motor and drivers side door mirror sold.
Sorry I had to dash off @VTECfan otherwise I could have given you a hand to get the window motor in.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
-
- Posts: 67
- Joined: Sun Feb 10, 2013 5:25 pm
- My Generation: 3G
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21266
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2089 times
- Been thanked: 257 times
It was a stepped drill bit, yep. Wasn't doing the drilling and photographing simultaneously
First side took ages cause I was sussing it all out carefully so I didn't drokk it up (one shot deal). Second side was quicker because I could attack it more confidently.
The harder part comes when removing the old one from the car that's being kept, tbh. Ideally I would only drill through the outer panel, leaving the panel behind intact so it's easy to weld to...
How does £15 sound for the headlining and screw cover?
First side took ages cause I was sussing it all out carefully so I didn't drokk it up (one shot deal). Second side was quicker because I could attack it more confidently.
The harder part comes when removing the old one from the car that's being kept, tbh. Ideally I would only drill through the outer panel, leaving the panel behind intact so it's easy to weld to...
How does £15 sound for the headlining and screw cover?
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
-
- Posts: 67
- Joined: Sun Feb 10, 2013 5:25 pm
- My Generation: 3G
Sound good, are you ever about during the day for collection? I sometimes have to drive to Hanningfield with work so I could tie it in. No prob's if not, I take it that your not desperate for me to pick it up?
I also need the drivers side seat belt if it available and in good knick.
Its good to see that your making the most out of the car, its a shame to see them go to waste.
I also need the drivers side seat belt if it available and in good knick.
Its good to see that your making the most out of the car, its a shame to see them go to waste.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21266
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2089 times
- Been thanked: 257 times
Yep, I have the seatbelt also.
Only about at the barn on a weekday if I've taken the day off, otherwise it would be weekends - I'm normally there then, although actually, only this weekend and next, then I'm doing things for the next few crikey, that's come up quick
Only about at the barn on a weekday if I've taken the day off, otherwise it would be weekends - I'm normally there then, although actually, only this weekend and next, then I'm doing things for the next few crikey, that's come up quick
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21266
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2089 times
- Been thanked: 257 times
@3rd_gen_aaron the headlining is out.
Also the centre console. It has a couple of holes from a mobile phone holder I'm afraid though, so let me know if it's any good to you;
Also the centre console. It has a couple of holes from a mobile phone holder I'm afraid though, so let me know if it's any good to you;
Also out/available/in good nick3rd_gen_Aaron wrote: I also need the drivers side seat belt if it available and in good knick.
.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)