4th Gen BA8 '95 facelift H22A Sebring Silver Breaking

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Sep 02, 2014 3:34 pm

Bump
Can bring bits to JAE if people want.

Post by **deaflude** » Sat Sep 13, 2014 7:25 am

Hi there,

do you have the outside connectors with its pigtails that is plug into the JDM mirrors's connectors? Heres the pic to give you an idea I need. Would you cut it off your prelude and mail it to me at Orlando, FL 32812, USA? Thank you!

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Sep 13, 2014 9:47 am

Hi, I don't want to hack into the door looms I'm afraid, no - I want to keep them complete. However I think I may have a couple of the pigtails from a previous setup that I bought... I'll see if I can find them.

Post by **deaflude** » Sun Sep 14, 2014 5:42 am

Please let me know. Thank you very much.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 21, 2014 12:54 pm

Bump
Wheels with tyres now on ebay http://www.ebay.co.uk/itm/6-spoke-17J-M ... 1652469482?
Panels available again due to timewasting knobend (only joking bludge

)

If anyone spots anything wrong with the ebay listing for wheels, please let me know - I'm not a wheel expert

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 21, 2014 7:48 pm

@lei lude
Finally got the front top arms off, sorry it's taken so long

Lots of pics below.
On the passenger side the ball joint boot has split so would need to be replaced (you can buy these separately from the ball joint) and the other one is still intact but cracked so I'd replace that as well while it's off tbh, but both ball joints are nice and tight, no wear.
The threads are fine.
The split pins snapped when I tried to remove them, hence they're still stuck in the holes, but they can be knocked out easily enough

Likewise the top bushes on the arms might look old, but they're absolutely fine. I drove the car and there was nothing wrong with them and when I checked them before removing, they're nicely tight and stiff still.

Passenger side;

Drivers side;

Hope your car's coming back together ok?

Back suspension will be off and in bits next weekend, weather willing.

Let me know if they're any good to you.

Cheers

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 21, 2014 7:52 pm

Slightly less horsepower under the bonnet than it used to have;

And @4thgenphil, I finally managed to get the driveshaft nuts undone today

Post by **Donald** » Sun Sep 21, 2014 8:01 pm

One hot cob.

On the boot floor cover thing, does it have that handy little pull tab?

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 21, 2014 8:25 pm

Post by **Donald** » Sun Sep 21, 2014 8:30 pm

The cob comment was for you baby.

I'll try find a pic when I get to a computer.

PS. Not forgotten about your trans.