4th Gen BA8 '95 facelift H22A Sebring Silver Breaking

Post by **Donald** » Sun Sep 21, 2014 8:50 pm

Here:

http://www.ludegeneration.co.uk/post131409.html#p131409

Posted by yourself

unless you just mean you were thinking if it had it or not, and not wtf he on bout.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 21, 2014 9:50 pm

Yeah I knew what you meant, I just can't remember if it has it or not!

(nice work finding the old thread though)

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Sep 27, 2014 7:26 pm

Ok @lei lude
Got the passenger side rear arm off now - that was the other one you were interested in, right?
Same story as with the front, ball joint is in great condition - nice and tight, but the dust cover is tired and should be replaced really.

So, any good to you?
Let me know

wurlycorner wrote:@lei lude
Finally got the front top arms off, sorry it's taken so long

Lots of pics below.
On the passenger side the ball joint boot has split so would need to be replaced (you can buy these separately from the ball joint) and the other one is still intact but cracked so I'd replace that as well while it's off tbh, but both ball joints are nice and tight, no wear.
The threads are fine.
The split pins snapped when I tried to remove them, hence they're still stuck in the holes, but they can be knocked out easily enough
Likewise the top bushes on the arms might look old, but they're absolutely fine. I drove the car and there was nothing wrong with them and when I checked them before removing, they're nicely tight and stiff still.

Passenger side;

Drivers side;

Hope your car's coming back together ok?

Back suspension will be off and in bits next weekend, weather willing.

Let me know if they're any good to you.

Cheers

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Sep 27, 2014 7:28 pm

@jjmartin349571
This was the bit you're after, right?
Passenger side or drivers side?

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 28, 2014 8:53 pm

Complete 2WS sub-frame now off/available including all bolts;

Except 1 bugger that sheared

Likely to have finished stripping the car next weekend and it'll be gone (provided the weather is good) so any special requests get them in now. If it's odd bits that you think no-one would take off, give me a try you may be surprised - I don't plan on doing this often so I'm taking advantage and storing stuff up for a rainy day

('strategic spare' stuff like fuel tank, looms etc. and glass, if we can get it out intact)

lxstuart · Post by **lxstuart** » Sat Oct 04, 2014 8:05 pm

You still got this?

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Oct 04, 2014 8:17 pm

Yes. The weather has been jobby today, so nothing more done on it. Tomorrow is all out attack!

Whatcher want?

lxstuart · Post by **lxstuart** » Sat Oct 04, 2014 8:27 pm

Might need a boot lid, not certain yet though.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Oct 04, 2014 8:33 pm

Got one of them

GJMHONDA2012 · Post by **GJMHONDA2012** » Sat Oct 04, 2014 9:07 pm

How much u after for the 2ws subframe mate