Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

4G 2.2 VTEC tyre pressures?
4G 2.2 VTEC tyre pressures?
Hi guys - can anyone tell me what the handbook advises on these? I've just discovered I don't have one!
- indigolemon
- The Chaos Engine
- Posts: 6680
- Joined: Wed Jun 30, 2010 1:45 pm
- My Generation: 4G
- PSN GamerTag: M149YSL
- Location: Kelty, Fife
- Has thanked: 24 times
- Been thanked: 71 times
- Contact:
- honda-hardy
- Club Cartographer
- Posts: 6268
- Joined: Sat Jan 28, 2012 7:35 pm
- My Generation: 5G
- Location: chippenham
- Been thanked: 1 time
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2484 times
- Been thanked: 306 times
- bb1boy
- Posts: 4459
- Joined: Mon Jan 30, 2012 11:57 am
- My Generation: 4G
- XBOX GamerTag: adam fantastic
Mudgey wrote:I run mine at 36psi atm and am going to be running them higher in the future to aid in better fuel economy & lower rolling resistance.. Obviously the downside to this is reduced cornering and braking performance, also exagerated tyre wear if your running a lot of camber etc..
+ driving everywhere at 45mph, coating the car in an aero-skin, coasting where possible, turning car off at red traffic lights, windows up, air-con off..
- Merlin
- Moderator
- Posts: 12393
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 68 times
- Been thanked: 303 times
Fair enough but I still don't understand the logic in doing the swap for the purpose of fuel economy. Pursuit of power or just to be different I get.
I thought the H22 was too old to have any form of fuel saving but I did learn that the ECU cuts current to the injectors to improve MPG when the throttle body plate is closed and revs are higher than 1,400 rpm (1,050 rpm in the 5th gen).
I thought the H22 was too old to have any form of fuel saving but I did learn that the ECU cuts current to the injectors to improve MPG when the throttle body plate is closed and revs are higher than 1,400 rpm (1,050 rpm in the 5th gen).