Prelude Plans 2014

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Mar 01, 2014 8:34 pm

Gonna steal Rocky's idea from last year...

UKDM
Get the roof, boot, bonnet and pass side rear arch resprayed again
Fit one of the sets of EL dials I've had for about 3 years - YEP, DONE!!!

Fit nucleustylzlude chip that I've had for 3 years
Get the stainless back box replaced/repaired
Fit the H22A8/Type-S intake I bought last year
Refurbish the oem rims

Probably due a cambelt?
Sort out the manky looking bits under the bonnet
New tyres

Lisa's JDM
Finish rebuilding the car after the respray (bootlining and roof bars to do)
Get my arse sorted to take it down to the window repair shop for the new windscreen moulding they got in last year for us as a snagging repair
Fit the braided brake lines to the rear that I bought last year
300mm front discs and re-furb the atr calipers that went on last year
Fit newly purchased Fujitsubo header

Lower it - 2 options under consideration...

Paint and fit the Mugen side skirts, Mugen rear spoiler and the front lip purchased last year
Keep searching for RRD rear spats

Upgrade the crap rear speakers
Fit one of the 3 sets of EL dials I've still got sat waiting
Engine bay dressing
Hopefully get the black/red option OEM interior

Full polybush
Painted rocker cover
CAMBELT!!!
New tyres
JDM rear bumper
Reverse light/fog light mod
Refit the front fog lights

Post by **Thebusofwoe** » Sat Mar 01, 2014 8:36 pm

Damn, I will transfer mine over

Post by **Thebusofwoe** » Sat Mar 01, 2014 8:37 pm

Well going into 2014, for me, was a list of parts to get, and an engine/car in pieces

.
So for me from this point on is to:

Re-fit replacement engine parts (Cam belt/water pump ect).
Buy and fit alloy flywheel and ATR clutch kit (oem).
Finish re-plumbing non-abs prop valve and bleed system.
Clean, paint and Refit engine, run and test.
Sort some interior bits out.
Sort a 4 wheel alignment out.
Insure, tax and MOT it.
Then Track day in May

Then after Track day will be swapping JDM headlights in, Fitting the rest of the poly bush kit and onto more upgrading/modifying

Post by **Gayno** » Sat Mar 01, 2014 8:49 pm

My plan for this year:

ROAD TRIP TO LE MANS

That's it, no money being spent, unless I find a set of wheels I like. Other than that, it's just enjoy it while it's alive!

Post by **GreenyUK** » Sat Mar 01, 2014 8:53 pm

Well for me this year.
Make good body work issues until respray 2015.
Change all belts and replace faulty LMAs and adjust clearances.
Full service including plugs.
New wheels.
New brakes.
New exhaust system.
De tango all indicators.
New induction kits.
Fit spoon chip to jdm Ecu.
Freshen up/tidy engine bay.
Recon/paint cam cover.
Fit new speakers front/rear.
Remove 4ws fit 2ws.
Tint windows.
Replace miss matched headlights.
Paint lower lip side skirts and nostrils body colour.

Most importantly be as active as I can on here. Attend as many shows as I can and meet lots of new friends

Not Lude related but book flights and go on holiday to New Zealand

for three weeks to see friends.

Busy year

Post by **Doggo** » Sat Mar 01, 2014 8:57 pm

Thinking about an air freshener (Fairly seriously).

Have to ask Nitin if there's a Honda JDM one

nitin_s1 · Post by **nitin_s1** » Sat Mar 01, 2014 9:07 pm

Doggo wrote:Have to ask Nitin if there's a Honda JDM one

Post by **Vtecmec** » Sat Mar 01, 2014 9:16 pm

Just a road trip of any kind will do..........

Post by **Gayno** » Sat Mar 01, 2014 10:13 pm

Vtecmec wrote:Just a road trip of any kind will do..........

@vtecmec

Join us for Le Mans then!!

Post by **Vtecmec** » Sat Mar 01, 2014 10:14 pm