I've got some ideas on the colour, it'll be 2 colours but the second will be subtler (if thats even a word!)wurlycorner wrote: ↑Thu Mar 18, 2021 5:50 pmBrilliant car.
Disagree with Nitin, one colour would be boring and the current paint scheme looks fab, IMO!
Think I'd prefer there to be a heatshield between the exhaust and the fuel tank...
Definitely agree the current wheels are wide enough - definitely needs wider or more offset so they fill the arches.
The mass of mud build up on the top of the inside wings, shows precisely why arch liners are a good thing
The heatsheild is a good shout thanks, I'll take a look at that when I refit it all back.
I'm looking at 20 x 10 for the rear with a 0 offset, it'll have to be made up of a 25mm 4 to 5 stud conversion as you can't find any 19 or 20 inch wheels with this PCD and then an et25 offset on the wheel - that should give it enough to fill the arch better.
Haha yeah - I'm not going to make new ones, just going to seal and Raptor all of the arches and floor properly - it should give it more than enough protection then...