Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
The lude that had two turbo builds
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21247
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2019 times
- Been thanked: 247 times
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
SuperiorRattyMcClelland wrote:I struggle to keep power down with 320bhp but my superior supercharger produces more torque in the midrange to start the wheel spin.
All because race car.
And I thought it was all because luxury car now lol
If it looks like jobby and smells like jobby it probably is jobby!
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
Thanks Ian yes all pipe work was steel !wurlycorner wrote:That's a lot of money spent there!
Glad you've persevered with the car though dude - great to see it's back on the road
Really odd to see the original intake pipe from the intercooler was steel, rather than aluminium
It's good to be back driving it rather than just looking at it in garage
If it looks like jobby and smells like jobby it probably is jobby!
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds currenthe spec pg15
So thought I'd update with new spec this won't be completed in one go as time is not my friend atm lol
Engine H22A7
Darton cylinder sleeved (dry)
CP forged pistons 10:1 CR
K1 forged con rods
ACL race bearings
Balance shaft delete
Crankshaft journal polish
Sump baffled oil return added
Cylinder head
Mild porting combustion chamber valve de-shroud
3 angle valve and seat cut
Supertech valve stem oil seals
H22A8 camshafts
Head skim
ATR intake manifold (ported)
EGR delete
Skunk 72mm throttle body
AEM hi flow fule rail
DW 1000CC injectors
Garrett GTX3076RS turbo
Nortech ram horn manifold
(Turbo and manifold zincotech coated)
3 in down pipe
3in custom exhaust
PWR aero2 high flow intercooler
3in custom intercooler pipe work
Tial style blow offs
K&N direct to turbo air filter
To be continued.......
Engine H22A7
Darton cylinder sleeved (dry)
CP forged pistons 10:1 CR
K1 forged con rods
ACL race bearings
Balance shaft delete
Crankshaft journal polish
Sump baffled oil return added
Cylinder head
Mild porting combustion chamber valve de-shroud
3 angle valve and seat cut
Supertech valve stem oil seals
H22A8 camshafts
Head skim
ATR intake manifold (ported)
EGR delete
Skunk 72mm throttle body
AEM hi flow fule rail
DW 1000CC injectors
Garrett GTX3076RS turbo
Nortech ram horn manifold
(Turbo and manifold zincotech coated)
3 in down pipe
3in custom exhaust
PWR aero2 high flow intercooler
3in custom intercooler pipe work
Tial style blow offs
K&N direct to turbo air filter
To be continued.......
Last edited by mr_drc on Tue Jun 05, 2018 11:39 pm, edited 1 time in total.
If it looks like jobby and smells like jobby it probably is jobby!
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21247
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2019 times
- Been thanked: 247 times
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
Quick update! Fitted new splitter and new 330 big brake kit much better .[GRINNING FACE WITH SMILING EYES]
Sent from my Nexus 7 using Tapatalk
Sent from my Nexus 7 using Tapatalk
If it looks like jobby and smells like jobby it probably is jobby!
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
Also fitted Yokohama advan ad08 as Toyo proxies aren't man enough so put them on rear it's so much more dangerous with the Yoko's on !!!
Sent from my Nexus 7 using Tapatalk
Sent from my Nexus 7 using Tapatalk
If it looks like jobby and smells like jobby it probably is jobby!
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
Bad news is I blew a hole in my pipe work yesterday where she comes off turbo! got new one on order and some heat shield sleeve think I will carry a spare in boot from now on!
Sent from my Nexus 7 using Tapatalk
Sent from my Nexus 7 using Tapatalk
If it looks like jobby and smells like jobby it probably is jobby!
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21247
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2019 times
- Been thanked: 247 times
-
- Posts: 505
- Joined: Tue Jun 24, 2014 11:19 pm
- My Generation: 5G
- Location: Desborough
- Has thanked: 6 times
- Been thanked: 15 times
Re: The lude that had two turbo builds
Don't know brand doubt rich would use any bum droppings though! Not that thin !
Sent from my Nexus 7 using Tapatalk
Sent from my Nexus 7 using Tapatalk
If it looks like jobby and smells like jobby it probably is jobby!