Rich's new black "lightweight" BB4

[wurlycorner]

I forgot to say... Directional tyre on backwards would also be an MOT fail, of course.

Yep, those pads are drokked

The proper caliper re-wind tools are also a bit of a pita on the rear calipers tbh because the thread pitch on the tool rarely/doesn't quite match the one inside the caliper - there's a 'nack' to using them without problems - but, yep, better than the cube type.

[Rich]

Boring update

Did rear discs and pads yesterday:


While I was at it I figured I'd see how easy it would be to paint the calipers - so I had a quick go with the carriers:


Didn't have any brake cleaner etc so there was no doubt some residual grease & dirt, but it painted OK:


I'll wait until after MOT time to dismantle everything and paint it all properly, don't really want to fiddle with brakes until it has a fresh ticket.

Still got a bit to do before then though... front discs and pads and then replace suspension all round! Bought myself an impact driver today to hopefully make the job a bit quicker.

[wurlycorner]

Yeah, they look a lot better

Impact drivers save a ton of time (and rounded off heads) dismantling.

[Rich]

MOT day today - came around sooner than I expected Didn't really get chance to sort out all the issues I wanted to but thought I'd chance it.

Anyway, it failed (as expected really) - but wanted to see if there was anything major up with the car as I'm not the best at diagnosing problems... and it turns out there's nothing really wrong with the car other than the fact it has a de-cat pipe! (a few small issues mainly around suspension etc but I'll be sticking the coilovers on anyway and replacing everything around there soon anyway) I'm pretty happy with that. I'll get a cat ordered in and then take it back to the garage for the re-test next week.

The guy even commented on how good shape the car was in otherwise considering its age. Only the bodywork lets the car down, and that's only due to mindless idiots who vandalised the car under ADS1's ownership! (I will get it sorted - it's on the agenda)

Anyhoo - I've order a catalytic converter from eBay which looked to be the right one - had the same part number (HA6007) as one which specifically said 'H22 import' on a website. Will this fit?

[Rudelude]

Enjoyed reading your blue to black lude thread... looking fwd to what you have planned for it... love seeing ludes restores to their former glory plus modern improvements