Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Fit new wheel now 4WS light
- crxdriver
- Posts: 157
- Joined: Sun Oct 08, 2017 8:52 pm
- My Generation: 5G
- Has thanked: 1 time
- Been thanked: 4 times
Fit new wheel now 4WS light
I fitted a EP3 wheel today. All went smoothly. I dremeled the notch and made it pretty much perfect to the standard wheel with a template i made. SRS light is out, horn work. I drive the car 10ft and the 4WS light comes on. I can reset the 4WS so im assuming the notch is in the right place as you need to do the 45-65 deg to center thing to reset. When i pull the code i seem to get a different single code every time but they all seem to point to a front sensor. God knows why this is only happening after the wheel install. Have i missed something?
Codes pulled so far for reference:
20 Main Steering Angle Sensor Front 8,15 CU, FSSAS, FMSAS, HC
24 Main Steering Angle Sensor Front 8,15 CU, FSSAS, FMSAS, HC
28 Main Steering Angle Sensor Front 12 CU, FSSAS, FMSAS, HC
I bet if i carry on resetting the 4WS and pull more codes i get the other code 22 and 26 for the Front Sensor also. Any help or suggestions appreciated
Codes pulled so far for reference:
20 Main Steering Angle Sensor Front 8,15 CU, FSSAS, FMSAS, HC
24 Main Steering Angle Sensor Front 8,15 CU, FSSAS, FMSAS, HC
28 Main Steering Angle Sensor Front 12 CU, FSSAS, FMSAS, HC
I bet if i carry on resetting the 4WS and pull more codes i get the other code 22 and 26 for the Front Sensor also. Any help or suggestions appreciated
- crxdriver
- Posts: 157
- Joined: Sun Oct 08, 2017 8:52 pm
- My Generation: 5G
- Has thanked: 1 time
- Been thanked: 4 times
It happens right after i turn the wheel. Straight is fine i tried it in a car park. The light used to come on every now and again if i tried turning on the spot too much but always thought it was the resistance causing it. After i was careful not to turn on the spot it very rarely came on after that. Seeing as i only ever get the code for the front sensor at the moment im planning on replacing it and hoping it fixes the issue. In my opinion the car doesn't feel so nimble without the 4WS. I just need to find out where the sensor is so looking for a workshop manual currently. Thanks.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21224
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1968 times
- Been thanked: 240 times
Good news.
The Honda 5th Gen manual 4ws section was posted up recently on the forum by someone (it was the only section we didn't previously have).
If you get a fault code again, the best thing to do would be to follow the fault finding guide on that manual, against the relevant code.
The Honda 5th Gen manual 4ws section was posted up recently on the forum by someone (it was the only section we didn't previously have).
If you get a fault code again, the best thing to do would be to follow the fault finding guide on that manual, against the relevant code.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)