Reading fault errors on ECU

Danielr637 · Post by **Danielr637** » Thu Jun 09, 2016 12:45 am

Hi,

My 4ws light is on my prelude, how do I read error codes?

Please help

Thanks

Daniel

Sent from my iPhone using Tapatalk

Post by **vanzep** » Thu Jun 09, 2016 7:52 am

This info is in the wiki along with a load of other good info - you can also download the Honda Manuals

http://www.ludegeneration.co.uk/wiki/in ... _and_codes

Post by **Merlin** » Thu Jun 09, 2016 8:55 am

4WS codes here - http://www.ludegeneration.co.uk/honda-p ... -t699.html

Danielr637 · Post by **Danielr637** » Thu Jun 09, 2016 5:12 pm

Okay thanks for the code, how do I go about reading them? Is there a way without plugging a machine into it?

Sent from my iPhone using Tapatalk

Danielr637 · Post by **Danielr637** » Thu Jun 09, 2016 5:15 pm

Ah read the link you sent Vanzep, do do I need to be checking behind the clutch for retrieving the error code? As After reading up isn't the one for the ECU on the passenger side near the footwell?

Sent from my iPhone using Tapatalk

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Jun 09, 2016 8:12 pm

No it's drivers side footwell, near the clutch pedal.

Post by **Merlin** » Fri Jun 10, 2016 8:55 am

On the 5th gen the service connector is on the passenger side behind a triangular piece of trim of the center console. There will be holder that has two connectors, a large one and a small two pin one. It is the smaller one you need to short.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sat Jun 18, 2016 3:30 pm

I didnnot notice it was a 5g

Lude Generation

Reading fault errors on ECU

Reading fault errors on ECU

Re: Reading fault errors on ECU

Re: Reading fault errors on ECU