Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Ratty's Type S...Jap Performance Magazine porno
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Ratty's Type S - Positive Displacement pumped
The AN fittings need to be tool tightened and its impossible to do that on a Type S. simply no room. I can hand tighten them but they leaked.
Maybe my kit was cheap but still its easier without one.
I will never need an oil cooler anyway. If my oil temps go too hot ill back off. Simples.
Maybe my kit was cheap but still its easier without one.
I will never need an oil cooler anyway. If my oil temps go too hot ill back off. Simples.

- lewd lude lover
- Supporter 2015
- Posts: 5658
- Joined: Sat Aug 07, 2010 9:51 pm
- My Generation: 5G
- Has thanked: 25 times
- Been thanked: 17 times
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2483 times
- Been thanked: 307 times
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Ratty's Type S - Positive Displacement pumped
They ended up on my gear gaitor.wurlycorner wrote: One question, where did the cat feet end up?

- Lude-dude
- Moderator
- Posts: 2181
- Joined: Tue Aug 03, 2010 10:39 pm
- My Generation: 5G
- XBOX GamerTag: Vtec Junky
- PSN GamerTag: Rob7niner
- Has thanked: 3 times
- Been thanked: 3 times
u know what, my car makes a weird moo sound
so might not be specific to jrsc preludes
I thought it was something to do with the intake air circulating
so might not be specific to jrsc preludes
I thought it was something to do with the intake air circulating


H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html
- GOONIESnvrSAYdie
- Posts: 398
- Joined: Thu Dec 19, 2013 9:46 pm
- My Generation: 5G
- PSN GamerTag: GOONIESnvrSAYdie
Just wanted to start by complimenting how stunning an example your car is dude. Made me realise I have a long way to go till my Type-S will be in the same category haha.
Just have a couple of questions. In the picture of the paint cans, are those the true paint codes on the tins? I'll be having a few bits done to mine in a month or two, but as I'm new to the car I've not had anything done thus far figured gathering as much information for my friend at the bodyshop couldn't hurt.
I'll be having my boot lid (rust bubbles), new rear lip and front bumper redone. Everything else is fine, just needs detailing.
Also, I loved the red interior, seen that on pictures of other cars, do they come up often/ expensive?
Cheers
Gareth
Just have a couple of questions. In the picture of the paint cans, are those the true paint codes on the tins? I'll be having a few bits done to mine in a month or two, but as I'm new to the car I've not had anything done thus far figured gathering as much information for my friend at the bodyshop couldn't hurt.
I'll be having my boot lid (rust bubbles), new rear lip and front bumper redone. Everything else is fine, just needs detailing.
Also, I loved the red interior, seen that on pictures of other cars, do they come up often/ expensive?
Cheers
Gareth

- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Ratty's Type S - Positive Displacement pumped
Your colour code will be in your passenger door sill. It will be either nh603p white diamond pearl or if it's 98? It will be nh624p premium white pearl. I mixed mine myself since I'm a sprayer by trade.
