Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

What's this?
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2484 times
- Been thanked: 306 times
- nucleustylzlude
- Moderator
- Posts: 4013
- Joined: Wed Aug 11, 2010 11:46 pm
- My Generation: 4G
- Location: Bristol, UK!
- Been thanked: 7 times
- Contact:
Right the black bit in the white plastic section is the dash lights brightness control unit:

I think that green plug is as Benny says, meant for a foglight installation, but isn't the UKDM location for the switch. That plug is for other markets that had the option of two switches in that location. See here:

I had my tweeter cover off the other day to drill a dirty great big hole in it for a gauge and noticed the section on the back to cut out for these switches and mounting holes moulded in, like this:



I think that green plug is as Benny says, meant for a foglight installation, but isn't the UKDM location for the switch. That plug is for other markets that had the option of two switches in that location. See here:

I had my tweeter cover off the other day to drill a dirty great big hole in it for a gauge and noticed the section on the back to cut out for these switches and mounting holes moulded in, like this:


- nucleustylzlude
- Moderator
- Posts: 4013
- Joined: Wed Aug 11, 2010 11:46 pm
- My Generation: 4G
- Location: Bristol, UK!
- Been thanked: 7 times
- Contact: