Modified atr inlet mani

106pete · Post by **106pete** » Sat Apr 05, 2014 8:12 pm

I've had this for awhile and don't have any need for it.

It's been fully prelude converted by me. As you can see in the pictures it had everything you need.
Mods done:
Flange angled
Vent holes plugged
Injector holes opened
Iacv adaptor plate
Brake pipe relocated and plugged
Vent pipe plugged
Cleaned and decoked, including egr system

What do you get, Everything you see in the pictures
Atr inlet
Atr throttle body
Atr injectors
Atr fuel rail
Atr map sensor
Atr tps
Prelude egr valve
Atr temp sensor
Atr vacume thing bolted to fuel rail?

The top thread is for a m12 grub screw plug I'm picking up Monday.

I want £200 plus postage please

davey80y · Post by **davey80y** » Sun Apr 06, 2014 12:59 am

would this fit straight to a 5th gen black top engine? if so what gains would I be looking at???

106pete · Post by **106pete** » Sun Apr 06, 2014 8:30 am

Hi mate yes it will bolt straight on and should run ok on a stock ecu but it may need a slight tune. I can sell you a apaxi avfc with wiring loom aswell for £50

Someone correct me if I'm wrong but I'm sure this will do the job?

As for power, I'm not really sure I've never seem them tested back to back but all the cool guys run these

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Apr 06, 2014 2:37 pm

106pete wrote:but all the cool guys run these

+rep

Post by **Thebusofwoe** » Sun Apr 06, 2014 2:46 pm

Would need to map out the IAB's chap. Or ur gna loose torque.

106pete · Post by **106pete** » Sun Apr 06, 2014 3:53 pm

Yeah I guess the apaxi can't do that, you'll probably lose some low down but gain in vtec.

If you want it mapped fully your looking at around £1k so it's worth having a few mods to make it worth the while.

Cutz · Post by **Cutz** » Sun Apr 06, 2014 8:20 pm

£1000 to map fully that seems awfully pricey.

avanced motorsport & engineering in silverstone northampton just fully tuned and mapped my h22 on an apexi FC ecu for £250 and they did a blinding job

Post by **RattyMcClelland** » Sun Apr 06, 2014 8:48 pm

Cutz wrote:£1000 to map fully that seems awfully pricey.

avanced motorsport & engineering in silverstone northampton just fully tuned and mapped my h22 on an apexi FC ecu for £250 and they did a blinding job

He meant including other parts like bigger throttle body air intake and exhaust.

106pete · Post by **106pete** » Sun Apr 06, 2014 8:53 pm

Yeah plus the £750 for the ecu and there's £1k ??

Just like ratty says

Therealjj91 · Post by **Therealjj91** » Sun Apr 13, 2014 7:07 pm

How long could you hold this?