Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

newbie with a question lol
newbie with a question lol
hi guys im now the proud owner of a 5th gen red prelude with 76k on her and im in love with it already 2.2 vti too lol only thing is im finding the clutch a bit funny as in there is no pressure needed to press the clutch about 2" then normal pressure kicks in no problems with clutch bit and what not and when i realease the pedal it goes to where its just above where it bits stays there for a couple of seconds the literally springs back to full travel but still nothing when i press pedal till about 2"down bit confused as never had this in any previous cars all help greatful cheers guys oh and im from doncaster way lol
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
The oem service manual can be downloaded from the wiki section on the forum. Think it's explained in there? It's just like bleeding a brake caliper though, basically.
One small word of caution on the 5th gen manual - it's the USDM manual rather than UKDM.
One small word of caution on the 5th gen manual - it's the USDM manual rather than UKDM.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
Re: newbie with a question lol
Hi guys quick update lol cheers for the welcome took a quick look this morning clutch fluid reserved if ok and no obvious leaks but the pedal stuck a couple of times and was hard to change gear had to flick pedal up with foot then reapply to change gear.