3rd gen rear spoiler brake light

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Sep 14, 2014 11:11 pm

My 3g doesn't have one.
This annoys me (it has the blanking plate instead)
It annoys me even more because according to Honda parts, my car was built with the brake light, not the blanking plate.

Does someone have one available please? Preferably with the wiring loom as well?

Thanks

prelude91 · Post by **prelude91** » Sun Sep 14, 2014 11:38 pm

are you sure it was built with one, my info is they were always an option (£250)

The "S" express · Post by **honda-hardy** » Mon Sep 15, 2014 12:22 am

http://www.ebay.co.uk/itm/13-2-Tabs-Spo ... 4aca913353

prelude91 · Post by **prelude91** » Mon Sep 15, 2014 1:01 am

Mine is 22 inches long, no pun intended

The "S" express · Post by **honda-hardy** » Mon Sep 15, 2014 12:09 pm

iain needds to measure the light and also count how many fixings it has.

prelude91 · Post by **prelude91** » Mon Sep 15, 2014 2:26 pm

I've dug out my blanking plate, in theory as a facelift same as mine the dimensions should be thus: Overall length 550 mm 3 fixing points, one centre and two out board at just over 245 from centre each

prelude91 · Post by **prelude91** » Mon Sep 15, 2014 2:27 pm

Sorry, overall length 555 not 550mm

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Sep 15, 2014 7:34 pm

560mm, 3 fixings.

(for reference, the 4th gen ones are 440mm with 4 fixings)

Post by **indigolemon** » Mon Sep 15, 2014 9:30 pm

This any use?

http://www.spoilerlights.com/servlet/th ... Categories

prelude91 · Post by **prelude91** » Mon Sep 15, 2014 11:14 pm

Top row, middle one looks about right