LG express needed for me - Oxford to London

nitin_s1 · Post by **nitin_s1** » Tue Sep 16, 2014 5:55 pm

Going to pick it up tomorrow!

Genuinely excited to see my Sat-nav actually working

nitin_s1 · Post by **nitin_s1** » Wed Sep 17, 2014 10:50 pm

Picked up the sat nav thing..

Will fit it tomorrow..

There's other nice bits on the car as it's JDM.. Power folding mirror, Bronze speedo rings, JDM strut brace, Fogs etc etc..

Someone was coming to pick up the JDM bumper later on that day as well...

who was it ?? anyone from here??

Post by **Donald** » Wed Sep 17, 2014 10:53 pm

I messaged him about those rings but he never replied.

nitin_s1 · Post by **nitin_s1** » Wed Sep 17, 2014 10:54 pm

I don't think he was a forum person.

I could have just took out the rings for free if I asked him nicely as he was eager to give most of it for free..

Post by **Donald** » Wed Sep 17, 2014 11:00 pm

I sent him something on eBay.

Anyone close going to get anything else, much tokens if you can get them

I'm not driving 150 miles for 4 bits of plastic.

nitin_s1 · Post by **nitin_s1** » Wed Sep 17, 2014 11:14 pm

Why not!!

Google said it was 1hr 30 mins to get there but took me 2hr 10 mins

as the traffic on a40 and M25 was just a joke. But was worth it.

The "S" express · Post by **honda-hardy** » Thu Sep 18, 2014 1:13 am

nitin, could you possibly get a volt meter and work out what wires from your loom are live power from the battery and what ones are switched live from the ignition and what one is earth, also please could you take some pictures of the wire connectors and wire colours. im still trying to fix the one from gordon.

also, do you have the owners contact details? @nitin_s1

nitin_s1 · Post by **nitin_s1** » Thu Sep 18, 2014 11:15 am

Sam I don't have a volt meter

and I want to have the whole thing in the car as soon as possible as i don't get time to work on the car (as I'm working long hours now).

You can have the wiring connectors from behind the sat nav unit (as I simply chopped off from the donor car), that might help you figure out which wire goes where.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Sep 18, 2014 11:42 am

nitin_s1 wrote: You can have the wiring connectors from behind the sat nav unit (as I simply chopped off from the donor car), that might help you figure out which wire goes where.

didn't merc say he was interested in the rest of the system, incl original loom...

nitin_s1 · Post by **nitin_s1** » Thu Sep 18, 2014 12:44 pm

Yes he can have them after Sam has finished with them..

The wiring loom is integrated in to the car so it would be near impossible to take the whole thing out. What I did to save my time and the person who was breaking it was just chopped off at least 5 cm away from the connectors, this would give more then enough room any extra connections/soldering by anyone.