JDM front cornering lights

nitin_s1 · Post by **nitin_s1** » Fri Sep 19, 2014 9:22 pm

It's good to know that these parts are the same just incase we need some in the future, we can ask for parts from either cars that have them

Post by **vanzep** » Fri Sep 19, 2014 9:24 pm

Post by **vanzep** » Fri Oct 03, 2014 11:27 am

just to update i got the cornering lights from @pedrodog66 yesterday

I have taken a couple of pics of the bulbs and bulb holders.
The bulbs look to be the original stanley ones and are marked Stanley 12V 21W Japan. Note they have an opalesent coating on the tip

They look to be intact but have some scorching in the base of the filament so i might need to get a couple of new bulbs to replace them.
Now i just need to work out a way of testing the setup is working before i fit them on the car

K30DPC · Post by **K30DPC** » Fri Oct 03, 2014 12:32 pm

not a biggy but it looks not complete. Do you have small harness with fuse holder? This should go from fan relay and supply power to this lights

Post by **Drax** » Fri Oct 03, 2014 2:24 pm

I agree, mine has a blue fuse holder - can take a pic when home if need be

Post by **vanzep** » Fri Oct 03, 2014 3:46 pm

hmmm i dont have that extra bit of the loom

some pics or help sorting that bit out would be appreciated

i do have some blade fuse holders - 3amp and 5amp kenwood ones and a TRC 10amp - maybe i can use of them...
believe it or not that mass of wires and stuff is what came out from the back of my kenwood head unit when i removed it from the car

Post by **Vtecmec** » Fri Oct 03, 2014 4:02 pm

Blimey, I bet you've improved your 0-60 a bit by removing that lot!

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri Oct 03, 2014 4:27 pm

No blue fuse holder on my spare loom...
I'll have a look at the working setup in the bb4 tomorrow when I go over to the barn and see what that has in it.

Post by **vanzep** » Fri Oct 03, 2014 4:36 pm

Vtecmec wrote:Blimey, I bet you've improved your 0-60 a bit by removing that lot!

Yeah it must be well over a kilo in weight and the kenwood double din was about 4 kilos

I did find this link and it look like im missing two small parts of the loom
link to pic of full loom courtesy of preludepower
http://www.preludepower.com/forums/show ... p?t=345116

Post by **vanzep** » Fri Oct 03, 2014 4:43 pm

wurlycorner wrote:
No blue fuse holder on my spare loom...
I'll have a look at the working setup in the bb4 tomorrow when I go over to the barn and see what that has in it.

cheers wurly - looks like its the two smaller looms - one on the drivers side goes to the side indicator on the front wing the other looks like its the one that connect to the fan or something on the passenger side - im not 100percent sure but thats what i think

originally i thought these two smaller looms were already in the car but now i can see they sort of piggyback onto the main loom