4th Gen - Passenger Door Moulding with Clips

arif_manji · Post by **arif_manji** » Sat Jun 20, 2015 6:30 pm

Hi guys,

I need the passenger side door moulding with the clips, must be clean and straight as they are very delicate, pictured as below:

If you have one, please PM me with details.

Cheers.

arif_manji · Post by **arif_manji** » Sun Jul 12, 2015 5:19 pm

Guys,

Any one have a nice straight one with the clips intact?

Mine seems to be all bent and doesn't sit properly - no idea why, taken it off and put it back on but no luck.

Please see pic:

alinton · Post by **alinton** » Sun Jul 12, 2015 7:05 pm

Good luck getting a decent one. I had to order a pair for my car from the dealer, as both were knackered, rubbers broken etc.

Blinkin' 200-odd quid as I recall.

A

mercutio · Post by **mercutio** » Sun Jul 12, 2015 7:25 pm

alinton wrote:Good luck getting a decent one. I had to order a pair for my car from the dealer, as both were knackered, rubbers broken etc.

Blinkin' 200-odd quid as I recall.

A

yep what he said ^^^^^^^^^^

your looking at them being up to 20 years old

arif_manji · Post by **arif_manji** » Sun Jul 12, 2015 7:47 pm

Seriously, £200??

alinton · Post by **alinton** » Mon Jul 13, 2015 9:44 am

Three hundred and sixty euros, here in Euro land. For a pair. Including VAT. But I think they were available in singles.

The dealer had to order them, took a couple of weeks. They come with the clips attached.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Jul 13, 2015 10:17 pm

Unusual for them to be bent like that arif, someone must have had it off before and not been careful when doing so I reckon.

When you took it off, did you straighten it before refitting? It should go back on straight.

If you managed to get it off without breaking the clips btw...

I've never managed to do that on a 4g!

arif_manji · Post by **arif_manji** » Tue Jul 14, 2015 10:23 am

I'll give it another try at the weekend Iain.

arif_manji · Post by **arif_manji** » Thu Aug 20, 2015 1:06 pm

wurlycorner wrote:Unusual for them to be bent like that arif, someone must have had it off before and not been careful when doing so I reckon.

When you took it off, did you straighten it before refitting? It should go back on straight.

If you managed to get it off without breaking the clips btw... I've never managed to do that on a 4g!

I took it off and tried to straighten it out but its not having it - although I salvaged all the clips and I think I know how it comes off. Iain do you have one? I don't need the clips, just the trim as long as its straight and intact.

Cheers

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Aug 20, 2015 5:38 pm

I do actually have one spare that is practically mint as it happens. I took it off the last breaker (and only broke one clip in so doing

). I was going to keep it for the bb4, which has 2 knackered ones. Let me mull it over the weekend and I'll get back to you?