crank pulley tool

Post by **4thgenphil** » Sat Feb 20, 2016 10:56 pm

Don't need it long ao I would rather borrow or buy in second hand, only need it to swap over my flywheel!

Cheers

Phil

Post by **Vtecmec** » Sat Feb 20, 2016 11:01 pm

bucks420 · Post by **bucks420** » Sun Feb 21, 2016 4:18 pm

I lent mine to Kawa a bit ago but your welcome to borrow it. If you cant get another one try dropping him a pm.

Post by **Merlin** » Mon Feb 22, 2016 12:11 pm

Jam the flywheel in the flywheel inspection hole. The flywheel bolts should be not be on so tight you need a crank tool for it.

Post by **4thgenphil** » Mon Feb 22, 2016 12:23 pm

Merlin wrote:Jam the flywheel in the flywheel inspection hole. The flywheel bolts should be not be on so tight you need a crank tool for it.

Its off the car so a massive pain in the gentleman's sausage to do plus its a jun flywheel so I don't really want to risk damaging it

Post by **Merlin** » Mon Feb 22, 2016 12:34 pm

Only last week did I remove my CC ultra fly wheel with the engine out of the car. I didn't have an issue.

Post by **Vtecmec** » Mon Feb 22, 2016 1:08 pm

Pm me your address Phil, you can borrow mine for a while.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Feb 22, 2016 9:05 pm

Might as well just publish it for all to see...
Phil Mycock
69 buthole lane
Beggars Bottom
Narrrrrrrfuk
BO08 73SS

haRRibo929 · Post by **haRRibo929** » Tue Feb 23, 2016 5:45 am

I made my from big nut and peace of iron velded together

cheap version of OEM special tool

bennyboy · Post by **bennyboy** » Tue Feb 23, 2016 11:09 am

@4thgenphil I've got one you can borrow mate, did you want to grab these tyres at the same time? Or can send it if not.