Clutch cost

claymore68 · Post by **claymore68** » Thu Dec 15, 2016 12:43 pm

Ok so as most people know im not that mechanical so here goes, I thought clutch was away but the pedal goes straight to floor and the resevoir is empty ! having looked online this would suggest a leak somewhere any advice or thoughts. As i drove home
the gears became harder to select but got home . Now when I check there is no pressure whatsoever.
Cheers
craig

Post by **indigolemon** » Thu Dec 15, 2016 1:57 pm

Check up behind your pedal with a torch - you'll see where the plunger goes through the bulkhead, have a feel and see if that's wet. If it is, your clutch master cylinder is the culprit.

Post by **vanzep** » Thu Dec 15, 2016 10:06 pm

you can get master cylinder and/or slave cylinder from eurocarparts (pagid) @ £55 for master cylinder - or try livingston autoparts for blueprint ones though they might be a bit more expensive
youve just got to find where its is leaking from

master cylinder is a bit of a pain to do so ive been told but the slave cylinder is quite easy to do - hope this helps

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Jan 23, 2017 9:09 am

Just catching up with old threads...
How did you get on with this @claymore68?
It definitely sounded like either master cylinder, slave cylinder or the line between the two.

claymore68 · Post by **claymore68** » Tue Jan 24, 2017 12:23 pm

Hi Iain,

Turned out to be the master slave cylinder after all , well chuffed cost £100 fitted so result.
Craig