Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

BB1 Scrapyard Dog - Mugen sides

Tell us all about your Lude, you know you want to ...
User avatar
vanzep
Supporter 2016
Posts: 7145
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Re: 1991 4TH Gen JDM Si Vtec

Post by vanzep » Wed Dec 13, 2017 1:54 pm

hmmm
thought everything was ok but driving the car today and there is a strong smell of damp and there is moisture in the passenger footwell under the floor mat:? Ive taken the mat out and put some absorbent crystal down to dry it out.
wonder if this is something to with the aircon and hopefully not the dreaded heater matrix pipes.....
i will need to take it to the garage to have it checked and also get the track rod end replaced - normally i would do these jobs myself but that is out the question at this time of year.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
sol-lude
Posts: 1032
Joined: Wed Jul 17, 2013 1:48 pm
My Generation: 4G
PSN GamerTag: Lude_666
Location: Kirriemuir
Has thanked: 10 times
Been thanked: 18 times

Post by sol-lude » Wed Dec 13, 2017 3:00 pm

but this time of year just means the jobs are like time attack jobs...get it done quickly before fingers fall off.

:lol: :lol:

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2483 times
Been thanked: 307 times

Post by wurlycorner » Wed Dec 13, 2017 9:36 pm

vanzep wrote:i will need to take it to the garage to have it checked and also get the track rod end replaced - normally i would do these jobs myself but that is out the question at this time of year.
Hope you know a decent/trustworthy one.

User avatar
vanzep
Supporter 2016
Posts: 7145
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Re: 1991 4TH Gen JDM Si Vtec

Post by vanzep » Tue Dec 19, 2017 4:40 pm

mild weather today so got stuck in :)
( no mechanic required - just time and patience)

checked the heater matrix and pipes where they come into the cabin - good news is they are all ok :D
coolant level is ok - whew!

with the roof liner out the way i was able to check all the sunroof drain tubes and it looks like they were blocked - one of them quite badly :oops: i had cleared the drains exits underneath the car when i first got it but skipped taking the headliner off the check the drains at the top :roll:

just to be 100% sure ive covered everything this time i will be checking the seal at the rear washer jet and also testing the front windscreen for leaks ;)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
sol-lude
Posts: 1032
Joined: Wed Jul 17, 2013 1:48 pm
My Generation: 4G
PSN GamerTag: Lude_666
Location: Kirriemuir
Has thanked: 10 times
Been thanked: 18 times

Post by sol-lude » Tue Dec 19, 2017 4:45 pm

Awesome Nick...that's a fair point I should have flushed mine when I had the liner off for the sunroof, will do it when I shim it down a bit.

Good shout though sounds like a nice easy fix for you.

User avatar
vanzep
Supporter 2016
Posts: 7145
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Re: 1991 4TH Gen JDM Si Vtec

Post by vanzep » Thu Dec 21, 2017 10:30 pm

Another mild December day so got a pressure washer set up to test the front windscreen for leaks at the passenger side and its bad news its leaking at the top corner.
Ive resealed it both sides as temporary measure but im going to have to get a new one fitted.
I have the 5th gen one piece windscreen rubber which i got from rejel just not sure if the windscreen can be taken out and refitted without it breaking or where to get a new windscreen at a reasonable price and fitting if needed. :?

I quite like the ukdm blue tint as it goes well with the phantom grey - might have to go with that to keep costs down :geek:

bit gutted as its probably not something i can fix myself :cry:
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2483 times
Been thanked: 307 times

Post by wurlycorner » Fri Dec 22, 2017 8:54 am

A windscreen company can remove and refit the front screen, no problem - had it done on all three of my Ludes, for painting.
I've tried twice before myself and failed both occasions (can do the rear screen, but not the front).

User avatar
vanzep
Supporter 2016
Posts: 7145
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Re: 1991 4TH Gen JDM Si Vtec

Post by vanzep » Fri Dec 22, 2017 11:02 am

ok wurly thats good to know as the front windscreen is in good condition.

id be a bit nervous about getting this done as i had the screen replaced on my BB4 by autoglass and they must have chipped the paint on the surround as it has rusted at the top corners so ideally i want the screen taken out and time allowed for me to touch in any damage to the paint work and also check for rust :?
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2483 times
Been thanked: 307 times

Post by wurlycorner » Fri Dec 22, 2017 12:28 pm

Go and speak to some local glass fitter places and see what you can suss out. It's local ones that I've used rather than major chains.

User avatar
vanzep
Supporter 2016
Posts: 7145
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Re: 1991 4TH Gen JDM Si Vtec

Post by vanzep » Fri Dec 22, 2017 11:11 pm

sure i can find someone locally but i might as well have a look and see if its covered by my insurance
bit of a bad time of year to be faffing about with the lude but needs must :)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

Post Reply

Return to “Lude Profiles”