Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Help
- Rich
- Pickle Rich
- Posts: 536
- Joined: Tue May 03, 2011 2:55 pm
- My Generation: 4G
- PSN GamerTag: richardofeston
- Location: Teesside
- Has thanked: 1 time
Help
Hey!
I'm a bit out of practice with working on my lude, been quite a while since I've had to do anything, but my most recent purchase (http://www.ludegeneration.co.uk/profile ... 21729.html) is soon to become my main car
Anyhoo, I took her for a good spin the other day and when I got home I heard a hissing noise - looked underneath and fluid was pissing out of somewhere. I think it's coolant, in fact pretty sure considering the expansion tank is near empty and I got a strange gurgling noise when I squeezed the top hose....
I've got a set of new radiator hoses in my stockpile of parts, so I've changed the top one already. Now, if I change the bottom one is that it - or are there other places coolant can leak from?
I started trying to remove the radiator from my old lude last night in case, but couldn't even get the bumper off (how the hell do you get the front indicators off? I think there's a screw in there but it's rusted to jobby) Am I likely to need the radiator? (It looks in better nick than the one on the black lude)
Realise there's quite a few questions in this post but need some reassurance I'm on the right track to fix the issue. I'll be working on her most of tomorrow... need to get her on the road before Thursday.
I'm a bit out of practice with working on my lude, been quite a while since I've had to do anything, but my most recent purchase (http://www.ludegeneration.co.uk/profile ... 21729.html) is soon to become my main car
Anyhoo, I took her for a good spin the other day and when I got home I heard a hissing noise - looked underneath and fluid was pissing out of somewhere. I think it's coolant, in fact pretty sure considering the expansion tank is near empty and I got a strange gurgling noise when I squeezed the top hose....
I've got a set of new radiator hoses in my stockpile of parts, so I've changed the top one already. Now, if I change the bottom one is that it - or are there other places coolant can leak from?
I started trying to remove the radiator from my old lude last night in case, but couldn't even get the bumper off (how the hell do you get the front indicators off? I think there's a screw in there but it's rusted to jobby) Am I likely to need the radiator? (It looks in better nick than the one on the black lude)
Realise there's quite a few questions in this post but need some reassurance I'm on the right track to fix the issue. I'll be working on her most of tomorrow... need to get her on the road before Thursday.
- Jackson Bondy
- Posts: 294
- Joined: Fri Sep 23, 2016 8:04 pm
- My Generation: 5G
- Location: Fareham
- Has thanked: 5 times
- Been thanked: 14 times
- Vtecmec
- LotM Winner
- Posts: 5490
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 149 times
- Been thanked: 441 times
Coolant can leak from any of the rubber pipes visible really, as well as those going to the rad, there are pipes going into to firewall to the heater matrix. Also there is a coolant pipe or two at the back of the block to check. Also the bumper does not have to be moved to remove the rad, undo the two pipes, two bolts on the top and it just lifts out.
For reference, the front indicators have two screws on each side, one visible on the outside on the reflector part and one on the front inner side of the part that has the bulbs.
For reference, the front indicators have two screws on each side, one visible on the outside on the reflector part and one on the front inner side of the part that has the bulbs.
- Rich
- Pickle Rich
- Posts: 536
- Joined: Tue May 03, 2011 2:55 pm
- My Generation: 4G
- PSN GamerTag: richardofeston
- Location: Teesside
- Has thanked: 1 time
Cheers bud. I think the inner screw is screwed. But if I can remove the rad without the bumper then that's not a problem. I think I'll have to get her up on ramps (or at least axle stands) and inspect all the hoses.Vtecmec wrote:Coolant can leak from any of the rubber pipes visible really, as well as those going to the rad, there are pipes going into to firewall to the heater matrix. Also there is a coolant pipe or two at the back of the block to check. Also the bumper does not have to be moved to remove the rad, undo the two pipes, two bolts on the top and it just lifts out.
For reference, the front indicators have two screws on each side, one visible on the outside on the reflector part and one on the front inner side of the part that has the bulbs.
It's probably worth replacing the rad as it's missing a few teeth, the old lude has around half the mileage and looks a lot more silver.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
Vast majority of hoses are visible from above the engine bay.
Yes if you're just wanting to find where the leak is from, it's fine to just stick water in without antifreeze. Don't run the car like that normally though (antifreeze isn't just about stopping it freezing, it's also got corrosion inhibitors too, so needs to be there all year round).
A favourite hose to leak is on the side of the head, underneath the distributor, above the gearbox. Tends to get oil leaking on it from the cam cover/distributor seal which softens the rubber. If it's that one, first time round you can get away with chopping a short length off the end and refitting it.
When you refill the system at the end after fixing the leaks/changing the rad, make sure you bleed the system properly. It's important because otherwise you will get engine idling issues, but can take a while.
Yes if you're just wanting to find where the leak is from, it's fine to just stick water in without antifreeze. Don't run the car like that normally though (antifreeze isn't just about stopping it freezing, it's also got corrosion inhibitors too, so needs to be there all year round).
A favourite hose to leak is on the side of the head, underneath the distributor, above the gearbox. Tends to get oil leaking on it from the cam cover/distributor seal which softens the rubber. If it's that one, first time round you can get away with chopping a short length off the end and refitting it.
When you refill the system at the end after fixing the leaks/changing the rad, make sure you bleed the system properly. It's important because otherwise you will get engine idling issues, but can take a while.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
- bennyboy
- Art Mechanic
- Posts: 2825
- Joined: Sat Aug 20, 2011 11:59 am
- My Generation: 4G
- PSN GamerTag: OCbennyboy
- Location: St Albans, Herts.
- Has thanked: 7 times
- Been thanked: 21 times
- Contact:
Wurly beat me to it. This ^ is worth a check. I had exactly that about a year ago and chopped about 40mm off. I ordered a new one anyway (very cheap) but it's still going strong.wurlycorner wrote: A favourite hose to leak is on the side of the head, underneath the distributor, above the gearbox. Tends to get oil leaking on it from the cam cover/distributor seal which softens the rubber. If it's that one, first time round you can get away with chopping a short length off the end and refitting it.
- Rich
- Pickle Rich
- Posts: 536
- Joined: Tue May 03, 2011 2:55 pm
- My Generation: 4G
- PSN GamerTag: richardofeston
- Location: Teesside
- Has thanked: 1 time
Thanks guys, it is indeed this hose you mention. It fooled me as I ran the engine until it started leaking again and it was pissing down the side of the gearbox, towards the back. I couldn't see any hoses above there that seemed even the least bit damp, but I can now see droplets under the distributor - which are obviously running down the gearbox and accumulating into a steady stream. Cheers lads
I removed the air intake as that was in the way (good thing I did as I discovered a split in the rubber at the end near the throttle body)... Does anyone have the first section of a type s intake available - or know how to fix it?
I removed the air intake as that was in the way (good thing I did as I discovered a split in the rubber at the end near the throttle body)... Does anyone have the first section of a type s intake available - or know how to fix it?
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times