JDM P13 ECU spoon tuned?

ziyaan · Post by **ziyaan** » Tue Nov 13, 2012 11:26 am

this is what looks to be a spoon sports tuned P13 ECU
it was in my auto BB4 Prelude and for an auto the car went like the clappers

I dont have any data sheet for it, but with all the extras that my car came with, i dont doubt it.

there are 2 spoon sports stickers over the shell and i dont want to remove them

note: this does not include the vtec controller

£100 delivered

mercutio · Post by **mercutio** » Tue Nov 13, 2012 11:57 am

so its a jdm p13 from a 2ws auto ?

ziyaan · Post by **ziyaan** » Tue Nov 13, 2012 8:37 pm

Yes sorry I should have been more specific

mercutio · Post by **mercutio** » Tue Nov 13, 2012 8:40 pm

do you know if its been converted to manual?

ziyaan · Post by **ziyaan** » Tue Nov 13, 2012 8:51 pm

I don't know

If you want

I'm finishing off making my obd1 - obd2 harness and will plug it in my mates 5th

If he has no issues I'll post it up as manual working

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Nov 13, 2012 10:21 pm

Is there a difference in the engine ECU then between 2ws and 4ws and between auto and manual?

I'd always assumed no difference in 2/4ws and didn't expect there to be any difference for auto's either (kickdown is a gearbox switch etc with no effect on engine tune)

mercutio · Post by **mercutio** » Tue Nov 13, 2012 10:30 pm

the autobox ecu gets signals from the engine ecu as to engine speed and such and i am sure its the same with the 4ws ecu as well as it needs speed signals to tell which way to turn the rear wheels

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Nov 13, 2012 10:33 pm

Interesting thought about engine speed for the gearbox.
Thought the 4ws unit got its speed signals from the ABS ECU?

Post by **Vtecmec** » Tue Nov 13, 2012 10:43 pm

I'm pretty sure the 2 and 4ws ECU's are interchangeable?

The auto ECU is specific, but can be converted for manual use in minutes once opened up.

ziyaan · Post by **ziyaan** » Tue Nov 13, 2012 11:19 pm

pls lock