Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Drax's new BB4 daily
- Drax
- Moderator
- Posts: 6268
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 16 times
- Been thanked: 381 times
Drax's new BB4 daily
So here she is:
had a new MOT on Monday just gone
Looking goooood next to my other lude
Some will recognise it as as JEBB4's old lude
http://www.ludegeneration.co.uk/profile ... 12087.html
Current Spec (cut & pasted from Josh's profile, minus some bits he/i have taken off for now):
Spec : 1995 JDM import BB4
No sunroof, no 4WS, no ABS
Original H22A 197 BHP engine
Original M2B4 LSD gearbox
Engine-
Engine partially rebuilt 10k miles ago:
New ACL big end race bearings
Nippon piston rings
Valves laped and new stem seals
Head skim, pressure test, gasket
New cam belt, balance belt and manual Tensioner
New blue print OE clutch
New platinum NGK spark plugs
Injectors cleaned and tested
Sump and rocker gaskets changed
Engine, box and rocker cover repainted
NGK blue plug leads
OE Honda VTEC solenoid gasket, blue point clutch
Apexi air filter
ASU breather filter (rocker cover)
Stainless 4-2-1 heat wrapped exhaust mani and down pipe
2.25 stainless centre section
j's racing replica rear silencer
Silenced De-cat
Chipped standard ECU 9k rev limiter
Chassis/Brakes-
Front and rear strut braces
Ferodo DS2500 front brake pads
Ferodo premium rear brake pads
EBC blank front discs
Goodridge braided brake hoses (red)
Castrol Edge dot 4 race fluid
Apex 35mm lowering springs
Japspeed rear toe arms
Exterior-
Honda ACCESS wind deflectors
Civic VTIS fan blade wheels
JDM yellow front fog lights
Interior-
Honda ACCESS Zebra mats
Tegiwa gearknob
Unknown aftermarket steering wheel
Alpine CDE-103BT head unit
Uprated pioneer speakers all around
Vibe amp (Professionally installed)
Vibe sub (Professionally installed)
Mugen rep pedal grips
Donald could you do the honours please in the lude directory and edit "Drax’s BB4" to link to this one as it currently links to what was "ludicrouswill's BB4" who has now passed it onto a guy in Elsemere port who only uses the FB Honda Prelude pages atm, but ill get him on here soon
Plans
She is going to be a daily so nothing major appart from keeping her running well, looking good and driving great. a few things to tidy, change and sort out so far i need to do:
give her a really good clean inside and out
Refit decat (swapped for MOT)
refurb alternator as old one was faulty
buy and fit new rad as the old one is looking very tired
remove and relocate rear fog
fix drivers door handle
fix passenger window
fix centre console buttons
buy and fit type S intake
buy and fit new interior bulbs
tighten handbrake
get second key cut from spare
fix rear seatbelt
find and fit a jack cover
buy and fit a front numberplate holder
fit one of the front splitters i have
fit spacers or swap for different alloys
swap gearknob
sort headlights with new ice bright bulbs or refit hid's
had a new MOT on Monday just gone
Looking goooood next to my other lude
Some will recognise it as as JEBB4's old lude
http://www.ludegeneration.co.uk/profile ... 12087.html
Current Spec (cut & pasted from Josh's profile, minus some bits he/i have taken off for now):
Spec : 1995 JDM import BB4
No sunroof, no 4WS, no ABS
Original H22A 197 BHP engine
Original M2B4 LSD gearbox
Engine-
Engine partially rebuilt 10k miles ago:
New ACL big end race bearings
Nippon piston rings
Valves laped and new stem seals
Head skim, pressure test, gasket
New cam belt, balance belt and manual Tensioner
New blue print OE clutch
New platinum NGK spark plugs
Injectors cleaned and tested
Sump and rocker gaskets changed
Engine, box and rocker cover repainted
NGK blue plug leads
OE Honda VTEC solenoid gasket, blue point clutch
Apexi air filter
ASU breather filter (rocker cover)
Stainless 4-2-1 heat wrapped exhaust mani and down pipe
2.25 stainless centre section
j's racing replica rear silencer
Silenced De-cat
Chipped standard ECU 9k rev limiter
Chassis/Brakes-
Front and rear strut braces
Ferodo DS2500 front brake pads
Ferodo premium rear brake pads
EBC blank front discs
Goodridge braided brake hoses (red)
Castrol Edge dot 4 race fluid
Apex 35mm lowering springs
Japspeed rear toe arms
Exterior-
Honda ACCESS wind deflectors
Civic VTIS fan blade wheels
JDM yellow front fog lights
Interior-
Honda ACCESS Zebra mats
Tegiwa gearknob
Unknown aftermarket steering wheel
Alpine CDE-103BT head unit
Uprated pioneer speakers all around
Vibe amp (Professionally installed)
Vibe sub (Professionally installed)
Mugen rep pedal grips
Donald could you do the honours please in the lude directory and edit "Drax’s BB4" to link to this one as it currently links to what was "ludicrouswill's BB4" who has now passed it onto a guy in Elsemere port who only uses the FB Honda Prelude pages atm, but ill get him on here soon
Plans
She is going to be a daily so nothing major appart from keeping her running well, looking good and driving great. a few things to tidy, change and sort out so far i need to do:
give her a really good clean inside and out
Refit decat (swapped for MOT)
refurb alternator as old one was faulty
buy and fit new rad as the old one is looking very tired
remove and relocate rear fog
fix drivers door handle
fix passenger window
fix centre console buttons
buy and fit type S intake
buy and fit new interior bulbs
tighten handbrake
get second key cut from spare
fix rear seatbelt
find and fit a jack cover
buy and fit a front numberplate holder
fit one of the front splitters i have
fit spacers or swap for different alloys
swap gearknob
sort headlights with new ice bright bulbs or refit hid's
Last edited by Drax on Thu Dec 14, 2017 10:14 pm, edited 2 times in total.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
- JEBB4
- Supporter 2014
- Posts: 1225
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 78 times
- Been thanked: 63 times
yay
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21224
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1968 times
- Been thanked: 240 times
- Drax
- Moderator
- Posts: 6268
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 16 times
- Been thanked: 381 times
Re: Drax's new BB4 daily
so far, done;
gave her a really good clean inside and out
Refitted decat (swapped for MOT)
refurb alternator as old one was faulty - wasn't required in the end
fixed passenger window
bought and fitted new interior bulbs
found and fitted a jack cover
fited one of the front splitters i have
swapped gearknob
gave her a really good clean inside and out
Refitted decat (swapped for MOT)
refurb alternator as old one was faulty - wasn't required in the end
fixed passenger window
bought and fitted new interior bulbs
found and fitted a jack cover
fited one of the front splitters i have
swapped gearknob
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
- RattyMcClelland
- Moderator
- Posts: 9195
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 183 times
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21224
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1968 times
- Been thanked: 240 times
- Drax
- Moderator
- Posts: 6268
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 16 times
- Been thanked: 381 times
Re: Drax's new BB4 daily
RattyMcClelland wrote:I give or 6 months before it becomes a second project car and you end up buying another daily.
.... Probably
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL