Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Newbie Hello come to say hi

New member? Introduce yourself here!
Manxhonda
Posts: 6
Joined: Sat Jul 25, 2015 6:58 pm
My Generation: 4G

Post by Manxhonda » Mon Jul 27, 2015 6:56 pm

Not seen breaking bad were abit old fashioned on this rock thank you all for replys I think the sump above is abit past it for myself mine isn't to bad but does drip onto the de-cat pipe and am worried about it catching fire ( silly question but how do you up load a photo ) I bow my head in shame for asking

User avatar
Donald
Supporter 2015
Posts: 9894
Joined: Sun Jun 12, 2011 10:17 pm
My Generation: 0G
Location: Earth 3.0
Been thanked: 7 times

Post by Donald » Mon Jul 27, 2015 7:06 pm

I think the Isle of Man motto & flag are a bit trite and you have nightmarish cats. Also the whole independence thing has sort of drokked you with regards to the EU.

That said, probably a pretty place to live and your tax legislation is nice.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Jul 27, 2015 8:11 pm

Are you sure it's the sump that's leaking and not the oil cooler o ring?

Manxhonda
Posts: 6
Joined: Sat Jul 25, 2015 6:58 pm
My Generation: 4G

Post by Manxhonda » Mon Jul 27, 2015 8:18 pm

And the NO national speed limit is pretty sweet and zero breakin and car crime is a massive plus side , am just working on the car now and it appears to be oil around the oil cooler / filter area and the filter is new but the sump is very rusty also , can you buy the O ring from Honda ? Il strip that of now and see what Iv got

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Jul 27, 2015 8:26 pm

Yes, you can get the O-ring from Honda.
There is a how to on the forum, including part number IIRC...

Manxhonda
Posts: 6
Joined: Sat Jul 25, 2015 6:58 pm
My Generation: 4G

Post by Manxhonda » Mon Jul 27, 2015 10:08 pm

Thank you just undid the oil filter and took out the 30mm adaptor tube , the O ring was shot when it flicked out it shattered on the floor so I was screwed but I went through some oil filters and found a O ring which was a perfect fit and was nice and soft unlike the hard flattened one which came out , refitted and cleaned off then topped up the oil ;) il run it for a few days now and see how it does but the sump pan is seeping oil after I brake cleaned the area off and ran it up

Post Reply

Return to “New Members”