Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Valuing my 95 2.2i Prelude

New member? Introduce yourself here!
raysmith48
Posts: 26
Joined: Wed Oct 24, 2012 10:25 am
My Generation: 4G

Valuing my 95 2.2i Prelude

Post by raysmith48 » Mon Nov 02, 2015 4:26 pm

Hi Guys

I'd be grateful for your advice. I had my 4th gen Prelude for 20 years from new - and now I must sell it. I'd value any advice on what you think I should advertise it for.

I hope I'm not breaking any forum rules.

Thanks in advance.

Photos below (if I've done it right!)

1995 Prelude 2.2i VTEC

I have had this from new, 20 years. I love this car. It’s having to go because we need a car which will comfortably seat 4.
My wife has an MX-5, and naturally I lost the argument as to which one should go.

Mileage 137,000. Japanese import.

Good points.

Engine and power – great.
Bodywork in sound condition with some minor blemishes.
No apparent corrosion.
Sunroof replaced last year.
Original wheels recently refurbished.
4 virtually brand new tyres.
Stainless steel exhaust.
New battery last year.
Timing belt changed 113510 miles.
Full service and tyres at cost of £745 28 Feb 2015
Original handbook and showroom brochure.
Serviced yearly as evidenced by service book.
MOT until March 6th 2016

Bad points.

Aircon not working – not sure why, but not holding gas.

ABS light is on. Diagnostics report front driver’s side speed sensor failure – pretty easy to fix, but I haven’t got round to it. In fail safe mode so safe to drive.

Passenger side window not retracting, but motor does run.

More of a niggle than a problem – four wheel steering warning light comes on occasionally. Resetting one easily accessible fuse cures it.

Located in Maidstone, Kent.


[album]
http://s292.photobucket.com/user/raysmi ... %20Prelude
[/album]

User avatar
Drax
Moderator
Posts: 6342
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 24 times
Been thanked: 431 times

Post by Drax » Mon Nov 02, 2015 4:46 pm

Beautiful example 8-) lovely colour too! are you sure its an import though as it has split 2-piece headlights? - is your air con controls manual or digital?
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
Confused
Posts: 749
Joined: Fri Jan 27, 2012 11:44 am
My Generation: 4G
Location: Notts / Essex
Has thanked: 3 times
Been thanked: 11 times
Contact:

Post by Confused » Mon Nov 02, 2015 5:04 pm

Hi and welcome.

As Drax says, are you sure it's an import?

The two-piece headlights, as well as the size/shape of the number plate holders, the location of the rear fog light, and the MPH dials (with smaller kph markings in the centre) all indicate to me that it is in fact a UK spec car.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Nov 02, 2015 5:11 pm

Yeah, that's a lovely car.

It's not an import though, it's an original UKDM model (hence owning since new).

IMO, there probably isn't a better fully original UK 4g out there, so this should be top money, over £2k.

However, it all depends if you need a quick sale or not.

As you say, the ABS will be a simple fix. If it's a rear sensor that's gone, it will also explain your 4WS fault. If it's a front sensor that's gone, then your 4WS fault is probably the common age related fault whereby the pins on the ECU PCB just need to be re-soldered.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Nov 02, 2015 5:12 pm

Confused wrote:Hi and welcome.

As Drax says, are you sure it's an import?

The two-piece headlights, as well as the size/shape of the number plate holders, the location of the rear fog light, and the MPH dials (with smaller kph markings in the centre) all indicate to me that it is in fact a UK spec car.
And for the ultra geeks... The location of the VIN plate (passenger suspension turret, rather than the slam panel) :ugeek:

raysmith48
Posts: 26
Joined: Wed Oct 24, 2012 10:25 am
My Generation: 4G

Post by raysmith48 » Mon Nov 02, 2015 5:18 pm

Sound like I'm getting my terminology wrong. The car was built in Japan. So I assumed a Jap import. But I guess you are saying they built it to a UK spec? VIN NO. is JHMBB11800C200540, if that helps.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Mon Nov 02, 2015 5:21 pm

Yep, understand what you meant now.
It's a UK spec car. These would not be called an 'import' car.
All Preludes were built in Japan and "import" is commonly used to refer to cars that were originally sold in Japan, but later re-sold and imported (as used cars) to the UK.

raysmith48
Posts: 26
Joined: Wed Oct 24, 2012 10:25 am
My Generation: 4G

Post by raysmith48 » Tue Nov 03, 2015 9:57 am

Hi Wurlycorner

It's the driver's side front wheel speed sensor for the ABS according to the paper clip test flashes. The 4WS niggle has been there for years, so not related.

... and for Drax - the aircon controls are manual.

Thanks guys.

User avatar
Drax
Moderator
Posts: 6342
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 24 times
Been thanked: 431 times

Post by Drax » Tue Nov 03, 2015 10:40 am

raysmith48 wrote:Hi Wurlycorner

It's the driver's side front wheel speed sensor for the ABS according to the paper clip test flashes. The 4WS niggle has been there for years, so not related.

... and for Drax - the aircon controls are manual.

Thanks guys.
ah yes, defo a UK then. I would still agree with Wurlycorner though, there probably isn't a better fully original UK 4g out there, so this should be top money, over £2k, depends if you need a quick sale or not :)

Plus the UK spec ones like yours are less likely to have rust issues than the imports lol
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
mercutio
LotM Winner
Posts: 14958
Joined: Sun Aug 08, 2010 8:45 pm
My Generation: 5G
Location: Sunny Manchester
Has thanked: 1 time
Been thanked: 4 times
Contact:

Post by mercutio » Tue Nov 03, 2015 5:18 pm

be a lot easier to get top money if it was sorted with an MOT though 8-)
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens :D :lol:
Dino wrote:I loves the 5th gen really.... just dont quote me on it... ;)
4thgenphil wrote:Mines 4 1/4 unches mate, sorry

http://www.ludegeneration.co.uk/profile ... -t618.html

Post Reply

Return to “New Members”