Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Modified 3g on the bay... A word of warning!
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
Modified 3g on the bay... A word of warning!
This one...
http://pages.ebay.com/link/?nav=item.vi ... 98&alt=web
Looks good, in all the current 'scene' ways. It is a lot of money though.
Beyond style, there is probably a good reason it's been matt blacked all over and had wide arches put on... I went to see this one when it was a standard lude for sale on eBay previously, in this listing (totally different seller I hasten to add - he was a very decent guy):
http://pages.ebay.com/link/?nav=item.vi ... 47&alt=web
The car drove very well, driveline and suspension were all good, but the shell was rotten, little bits all over but also some major bits. IMO (and that of the seller back then) it would not have passed another MOT without work to the sills, at least. There was also major rot all over the roof around the sunroof (i mean major), and other bits of rot all round the car (literally - only the bonnet, bootlid and one door were rust free) in difficult to repair places on the shell. If I tell you we were talking around £400 for it without the Renault turbines (and only that high because it had nearly a full MOT, low mileage and all the running gear was good) that should give you an idea of condition...
Rust isn't mentioned on the new add, so I assume it must all have been 'sorted'?
Maybe... It's all been done properly (!) but considering the only way to repair the roof in my (and the original sellers) opinion was to cut out the whole section from the a pillar to half way back towards the rear... That was a lot of work.
If anyone is interested in going to see it, I suggest taking a magnet with you and peeling back all the rubber trim and anything else that's been stuck onto the car... Look in the odd areas like scuttle panel under the screens. The front of one sill was good and the back of the other. Both rear arches were solid, but rusting (if that makes sense - rusty, but no holes and you couldn't put a key through them yet. Would have needed thorough rust treat and filler over to get back to smart before paint).
If you buy it unseen, be aware you'll probably have a lot of fun and get points at all the shows this year, but it will then fail an MOT and you'll be left licking your wounds (the massive outlay that is being asked for it).
http://pages.ebay.com/link/?nav=item.vi ... 98&alt=web
Looks good, in all the current 'scene' ways. It is a lot of money though.
Beyond style, there is probably a good reason it's been matt blacked all over and had wide arches put on... I went to see this one when it was a standard lude for sale on eBay previously, in this listing (totally different seller I hasten to add - he was a very decent guy):
http://pages.ebay.com/link/?nav=item.vi ... 47&alt=web
The car drove very well, driveline and suspension were all good, but the shell was rotten, little bits all over but also some major bits. IMO (and that of the seller back then) it would not have passed another MOT without work to the sills, at least. There was also major rot all over the roof around the sunroof (i mean major), and other bits of rot all round the car (literally - only the bonnet, bootlid and one door were rust free) in difficult to repair places on the shell. If I tell you we were talking around £400 for it without the Renault turbines (and only that high because it had nearly a full MOT, low mileage and all the running gear was good) that should give you an idea of condition...
Rust isn't mentioned on the new add, so I assume it must all have been 'sorted'?
Maybe... It's all been done properly (!) but considering the only way to repair the roof in my (and the original sellers) opinion was to cut out the whole section from the a pillar to half way back towards the rear... That was a lot of work.
If anyone is interested in going to see it, I suggest taking a magnet with you and peeling back all the rubber trim and anything else that's been stuck onto the car... Look in the odd areas like scuttle panel under the screens. The front of one sill was good and the back of the other. Both rear arches were solid, but rusting (if that makes sense - rusty, but no holes and you couldn't put a key through them yet. Would have needed thorough rust treat and filler over to get back to smart before paint).
If you buy it unseen, be aware you'll probably have a lot of fun and get points at all the shows this year, but it will then fail an MOT and you'll be left licking your wounds (the massive outlay that is being asked for it).
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Just asked 

bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times

FWIW, I was looking at buying it for parts with Lloyd off here (he wanted suspension), Phil possibly having the rear arches and merc the good bits of the sills. I would have kept the engine (1 spare b20a7 isn't enough

--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
well he has spluffed a lot of money on rattle cans and plastic arches since then
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
your getting old Victorwurlycorner wrote:![]()
Says it all...
The bumpers aren't even any good now they've had crap stuck to them and Matt blacked all over the original textured unpainted bits

bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
eye donnt Beeeeleeeivvvveeee it 

bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html