
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

My 5th gen 2.2vtec (low lude)
- ddoubledanny
- LotM Winner
- Posts: 1016
- Joined: Fri Jan 27, 2012 8:24 pm
- My Generation: 4G
- PSN GamerTag: Ddoubledanny
- Location: Kettering
Re: My 5th gen 2.2vtec (low lude)
Car has had custom made coilovers fitted to It. It doesn't ride on bump stops at all. Due to the double wishbone suspension set up on rear I have had to cut a section out of in arch/chassis to get suspension to travel in to car with no touching anywhere. Lowest part of car is around 35mm from road. I get tyre rub on full lock but I am getting smaller tyres fitted soon. And as for new wheels?? No chance. I love to have my car looking stock but with a savage static drop on it .
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
I like the look bud, but I would seriously worry being that low. And I'd hate to be restricted about where I could go. I know you said in your other post you were going to have a skid plate fitted. I'd say that's a must! How far off the ground is your sump/downpipe?
Still, it's your ride bud
... And good age

Still, it's your ride bud



Re: My 5th gen 2.2vtec (low lude)
Sump is protected by the lower brace going front to back. And exhaust cat and centre box are being removed this week so the boxes don't hit the Road whilst driving
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Who custom made the coilovers I work very closely with most UK suspension companies even with you getting full travel the spring rate and damper stiffness will be way to high to give you optimum handling and keep it flat enough to sustain that drop without the tyres hitting the top of the arch linings on hard driving
I hit the limiter in my h23 vtec still didn't kick in
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
- stk prelude
- Posts: 743
- Joined: Sun Jan 29, 2012 10:17 pm
- My Generation: 5G