I believe the resonatator only keeps the inlet running quiet, and wont affect performance. You will get a bit more of a throaty inlet noise with it removed, though not as loud as an aftermarket intake.
I've never used a panel filter other than an oem so cant really comment on performance. Have you done a search? I would think its been covered by others.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Panel Filters
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
The filter of the K&N etc are literally a lot less restrictive than an OEM paper style filter. R&D have basically developed a happy medium between filtering and airflow.
The resonator also has a butterfly in it that opens up in the higher revs to let a bit more air flow though. (Not sure if it's in unison with the IAB's or slightly before). It helps with low end torque when it's closed and obviously higher end revs when it's opened.
The resonator also has a butterfly in it that opens up in the higher revs to let a bit more air flow though. (Not sure if it's in unison with the IAB's or slightly before). It helps with low end torque when it's closed and obviously higher end revs when it's opened.
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Panel Filters
Previous own got ITG to make a custom filter for my Type S. Don't know of any other lude using one but its certainly an induction kit type noise. But can't comment on performance gains.

- h10ndr
- Posts: 819
- Joined: Mon Sep 13, 2010 7:07 pm
- My Generation: 4G
- Location: West Yorkshire
- Has thanked: 1 time
- Been thanked: 10 times
- Contact:
When Mugen did an intake for the Accord Euro-R - the kit included a K&N panel filter for their carbon air box. They deleted the resonator and added a trumpet style air pipe to the bottom of the air box which hung down into the inner wing space. This space is then blocked off from the engine/radiator with an additional panel. Then cold air is ducted from the front bumper along the inside the bumper molding - and into the inner wing area. This makes the inner wing area act as the "resonator" replacement.
If a K&N filter is good enough for them, its good enough for me.
If a K&N filter is good enough for them, its good enough for me.
Tim
2004 S2000 GT Berlina Black
SOLD 1992 JDM-BB1UKSPEC-B545P-H22A7-U2Q7-P72 NEPTUNE RTP
RIP 1995 UKDM-BB1-Pacific Blue Pearl
http://www.s2000-parts.com
Profile
2004 S2000 GT Berlina Black
SOLD 1992 JDM-BB1UKSPEC-B545P-H22A7-U2Q7-P72 NEPTUNE RTP
RIP 1995 UKDM-BB1-Pacific Blue Pearl
http://www.s2000-parts.com
Profile
- lewd lude lover
- Supporter 2015
- Posts: 5658
- Joined: Sat Aug 07, 2010 9:51 pm
- My Generation: 5G
- Has thanked: 25 times
- Been thanked: 17 times
I noticed a stepped improvment in engine performance (smoother accelleration when past 3k and a lot freer breathing up the top of the rev range) as i added a panel filter and then removed the resonator.
The panel filter will allow a lot more air through for the same amount of time for sure. Removing the resonator is the single best free mod you can do the the H22 imo. For sure the car 'might' feel the tiniest little incy bit less torque'y below 3,000rpm but the difference between 5,500 and redline MORE than than makes up for it. More than.
And to be honest who the funk cares about 3000rpm and below. You only spend seconds there if you are having it
If you want low end grunt buy a bimmer. you want top end screamer fun so bought a honda though. removing the resonator just makes it more fun.
2p
The panel filter will allow a lot more air through for the same amount of time for sure. Removing the resonator is the single best free mod you can do the the H22 imo. For sure the car 'might' feel the tiniest little incy bit less torque'y below 3,000rpm but the difference between 5,500 and redline MORE than than makes up for it. More than.
And to be honest who the funk cares about 3000rpm and below. You only spend seconds there if you are having it

2p
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2484 times
- Been thanked: 306 times