Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Oil breather snapped

Engine/Gearbox questions and discussion
User avatar
MaccaIRL
Posts: 773
Joined: Mon Dec 01, 2014 9:04 pm
My Generation: 5G
XBOX GamerTag: MaccaIRL
Location: Belfast

Oil breather snapped

Post by MaccaIRL » Fri Oct 23, 2015 5:23 pm

I have a h22a rocker cover I was going to refurb while still driving lude as as daily... problem is the oil breather pipe has snapped off :shock:

If I got this welded am I asking for trouble down the line?
It's gonna be the permanent cover on the lude

Pics below
Image

Image

Just realised these done show it at all grrrr
Lude-behaviour!

ek9sid
Supporter 2015
Posts: 955
Joined: Tue Jul 15, 2014 1:20 pm
My Generation: 5G
Has thanked: 20 times
Been thanked: 38 times

Post by ek9sid » Fri Oct 23, 2015 5:25 pm

Looks like it's your pcv. You can get a replacement for around £30-£40 if I remember correctly.

I wouldn't weld it up though as it plays quite significant role in stuff :lol:

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21496
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2484 times
Been thanked: 306 times

Post by wurlycorner » Fri Oct 23, 2015 5:56 pm

You could get it welded, but it's a faff. The pipe itself is steel, the cover is aluminium. which bit has snapped?
If it's the pipe, it might be available separately from Honda (they're an interference push fit, so you could remove remains of the old one and replace with new).
If it's the cam cover, welding it will be a pain - aluminium is tig welding only and being cast, it's more difficult again. For the cost of a used replacement cover, you might as well just get another one, complete.

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Fri Oct 23, 2015 5:59 pm

The PCV is snapped, but also the breather pipe in the back left (driver's side) corner. You could weld on a new barbed bit of pipe, or you drill and tap the hole to screw in a fitting, but then you'd need to ensure you get all the swarf out.

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Fri Oct 23, 2015 6:00 pm

I'd get a new cover and refurbished it also.

User avatar
MaccaIRL
Posts: 773
Joined: Mon Dec 01, 2014 9:04 pm
My Generation: 5G
XBOX GamerTag: MaccaIRL
Location: Belfast

Re: Oil breather snapped

Post by MaccaIRL » Fri Oct 23, 2015 6:27 pm

What is a pcv btw lol
And where is it on the head D:
Lude-behaviour!

ek9sid
Supporter 2015
Posts: 955
Joined: Tue Jul 15, 2014 1:20 pm
My Generation: 5G
Has thanked: 20 times
Been thanked: 38 times

Post by ek9sid » Fri Oct 23, 2015 6:32 pm

Didn't even see that breather (probably because it's missing :lol: ). The pcv is the little doofer that sits in the hole towards the rear of the valve cover, next to where the wiring loom sits (in the little divvet on the right hand side)

User avatar
MaccaIRL
Posts: 773
Joined: Mon Dec 01, 2014 9:04 pm
My Generation: 5G
XBOX GamerTag: MaccaIRL
Location: Belfast

Re: Oil breather snapped

Post by MaccaIRL » Fri Oct 23, 2015 6:36 pm

Aaah... that's relatively important then lol
Lude-behaviour!

User avatar
Donald
Supporter 2015
Posts: 9894
Joined: Sun Jun 12, 2011 10:17 pm
My Generation: 0G
Location: Earth 3.0
Been thanked: 7 times

Post by Donald » Fri Oct 23, 2015 7:03 pm

PCV is what you wear at the weekend.

User avatar
MaccaIRL
Posts: 773
Joined: Mon Dec 01, 2014 9:04 pm
My Generation: 5G
XBOX GamerTag: MaccaIRL
Location: Belfast

Re: Oil breather snapped

Post by MaccaIRL » Fri Oct 23, 2015 7:14 pm

She swore shed never tell :roll:
Lude-behaviour!

Post Reply

Return to “Engine / GearBox”