Post
by RattyMcClelland » Sun Feb 14, 2016 2:19 pm
Well got the 245/40/17 Yokohama AD08r fitted to my Enkei RPF01 17x9 et45.
Fitted them to the car. The yanks say you can't fit these on the front without a spacer as the spokes fowl the caliper. Well Accord Type R Calipers are way slimmer and there is loads of room.
The rears looked too "sat" in the arches so I spaced them out 5mm and it just caught the rear inside metal edges by a mm.
Changed the spacer to a 3mm and it's fits perfectly. All 4 corners tuck under the arches with the natural camber curve. Rears has about 3mm of room and front roughly 5mm.
All arches are heavily rolled and pulled slightly, rear tabs cuts off.
Took the car for a drive after removing the rear tanabe roll bar for a stock one and the only place I'm rubbing is the n/s rear bumper from the tab area to about half way down. This Wil naturally wear away.
245/40/17 fits. And ad08s are a true 245tread and have square shoulders.
Win.
Pics maybe later.