Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Balance Shaft eliminator kit
-
- Supporter 2015
- Posts: 1089
- Joined: Wed Feb 01, 2012 2:59 pm
- My Generation: 5G
- Been thanked: 1 time
Balance Shaft eliminator kit
Hi, I've contacted with a guy, who is working on CNC's and doing a few things for his Hondas.
He curently making a balance shaft eliminator kit.
Kit will include everything what is needed to remove balance shaft:
Blanks and plugs, main cover, oil plugs and tap
Thee are avilable for;
So two models:
H22/H23 OBD1 and one to H22/H23 OBD2
Price: 100 pounds delivered
If people who are interested of that will be quite a lot, tht price can be reduced a little bit
If anybody is interested of them please put your name down the list:
1)...
2)...
3)...
...
He curently making a balance shaft eliminator kit.
Kit will include everything what is needed to remove balance shaft:
Blanks and plugs, main cover, oil plugs and tap
Thee are avilable for;
So two models:
H22/H23 OBD1 and one to H22/H23 OBD2
Price: 100 pounds delivered
If people who are interested of that will be quite a lot, tht price can be reduced a little bit
If anybody is interested of them please put your name down the list:
1)...
2)...
3)...
...
ludes are ment to be driven, not wanking around on a stand like a Civic.
- CrunchyAdams82
- Posts: 2474
- Joined: Tue Mar 19, 2013 9:46 am
- My Generation: 4G
- Location: Southampton, Hampshire
Will this be equivalent to the Kaizenspeed kit?
http://www.xenocron.com/kaizenspeed-man ... 6801f1b%22
Obviously minus the manual tensioner kit..
http://www.xenocron.com/kaizenspeed-man ... 6801f1b%22
Obviously minus the manual tensioner kit..
Profile Thread
Andy's Si VTEC BB4
Andy's Si VTEC BB4
K30DPC wrote:If you wanna go there is nothing to stop you. ONE LIFE LIVE IT
-
- Supporter 2015
- Posts: 1089
- Joined: Wed Feb 01, 2012 2:59 pm
- My Generation: 5G
- Been thanked: 1 time
Re: Odp: Balance Shaft eliminator kit
It is mate, because you would not be able to take a balance shaft out when engine is in engine bayMerlin wrote:It is an engine out job to fit these kits. Well, it is for the Kaizenspeed one anyway but I doubt this is any different.
Yes, no manual tensionerCrunchyAdams82 wrote:Will this be equivalent to the Kaizenspeed kit?
http://www.xenocron.com/kaizenspeed-man ... 6801f1b%22
Obviously minus the manual tensioner kit..
ludes are ment to be driven, not wanking around on a stand like a Civic.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21236
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1998 times
- Been thanked: 240 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
-
- Posts: 468
- Joined: Tue Jul 16, 2013 8:33 pm
- My Generation: 5G
- Location: Portsmouth
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21236
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1998 times
- Been thanked: 240 times
Reduces weight very slightly, reduces lost horsepower very slightly (engine has to turn less components, with less drag) reduces engine spin up lag very slightly so improves responsiveness (for same reason) and increases oil pressure to the rest of the components in the engine very slightly.
On the converse, will increase engine vibration, drive shunt when going on/off throttle and also possibly noise - yep, you guessed it, all very slightly...
I don't know what the measured differences in all of those are, but very slight.
On it's own (this is as an un-informed deduction just from basic principles, so please don't take this as trying to dampen down sales from cebul's valued bringing of group buys to the forum) I doubt very much that it's worth doing, but as part of doing lots of other mods to the engine, it would be?
No doubt some luders that have done this will be able to confirm (likely )/deny (unlikely )/put some specific numbers to what I've said above
On the converse, will increase engine vibration, drive shunt when going on/off throttle and also possibly noise - yep, you guessed it, all very slightly...
I don't know what the measured differences in all of those are, but very slight.
On it's own (this is as an un-informed deduction just from basic principles, so please don't take this as trying to dampen down sales from cebul's valued bringing of group buys to the forum) I doubt very much that it's worth doing, but as part of doing lots of other mods to the engine, it would be?
No doubt some luders that have done this will be able to confirm (likely )/deny (unlikely )/put some specific numbers to what I've said above
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- CrunchyAdams82
- Posts: 2474
- Joined: Tue Mar 19, 2013 9:46 am
- My Generation: 4G
- Location: Southampton, Hampshire
When are you expecting commitment - money wise?
Profile Thread
Andy's Si VTEC BB4
Andy's Si VTEC BB4
K30DPC wrote:If you wanna go there is nothing to stop you. ONE LIFE LIVE IT