
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Fefelarue's 3rd gen Honda Prelude
Re: Fefelarue's 3rd gen Honda Prelude
Hello again!
Got a few bits done today, first off was the rear speakers, as I had some spare ones of the same size lying around from my old car.
Got the old ones out:

Old vs new (that's what bum droppings speakers look like after 24 years! - They fell apart in my hands)

And the new ones in: (so much better quality, but still planning on amped front comps and a 15/18" sub when I can afford it)

Next up was the exhaust, I got a few bits delivered from t'internet:



Old back box off ready to chop:

And after lots of measuring, fitments and gaffa tape, I finally got it all welded into one hybrid mega japcan beast:

I've attached it temporarily, but i'll be sorting some proper hangers asap and get it nice and tight against the bumper as it's a bit low here:

Thanks for looking! comments welcome
Got a few bits done today, first off was the rear speakers, as I had some spare ones of the same size lying around from my old car.
Got the old ones out:

Old vs new (that's what bum droppings speakers look like after 24 years! - They fell apart in my hands)

And the new ones in: (so much better quality, but still planning on amped front comps and a 15/18" sub when I can afford it)

Next up was the exhaust, I got a few bits delivered from t'internet:



Old back box off ready to chop:

And after lots of measuring, fitments and gaffa tape, I finally got it all welded into one hybrid mega japcan beast:

I've attached it temporarily, but i'll be sorting some proper hangers asap and get it nice and tight against the bumper as it's a bit low here:

Thanks for looking! comments welcome

- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
- pbryant_knight
- Posts: 198
- Joined: Mon May 13, 2013 4:52 pm
- My Generation: 5G
Re: Fefelarue's 3rd gen Honda Prelude
Cheers folks!
Yeah it was on ebay for a day before I contacted the guy and made an offer, then got it the next day
Yeah it was on ebay for a day before I contacted the guy and made an offer, then got it the next day

Re: Fefelarue's 3rd gen Honda Prelude
Little update under the hood.
So here's what it looked like, not exactly clean, but drokking good for a 24 year old car!

I gave it a quick clean with some wd40, and took off the exhaust manifold cover

Then began sanding down the cover

First coat

All done

Gave the bay another clean, and whacked it back on

Sorry it's not the most exciting update, but tomorrow i'm getting powdercoating quotes for the rocker cover, and i've just had a mad silicone hose shopping spree on ebay, so good stuff will be happening soon!
Comments welcome
So here's what it looked like, not exactly clean, but drokking good for a 24 year old car!

I gave it a quick clean with some wd40, and took off the exhaust manifold cover

Then began sanding down the cover

First coat

All done


Gave the bay another clean, and whacked it back on

Sorry it's not the most exciting update, but tomorrow i'm getting powdercoating quotes for the rocker cover, and i've just had a mad silicone hose shopping spree on ebay, so good stuff will be happening soon!
Comments welcome
