Cam end seal?

Post by **Merlin** » Thu May 30, 2013 11:39 am

Where did everyone get their shiny cam end seal from? The Honda OEM is £12 but if there is an aftermarklet one for not much more I might be interested.

Post by **Lude-dude** » Thu May 30, 2013 11:40 am

ebay.com I got skunk2 one while back

Post by **4th Gen Doug** » Thu May 30, 2013 11:43 am

^^^
What he said - got an OEM one for a fiver if I remember rightly

Post by **NafemanNathan** » Thu May 30, 2013 11:47 am

Blox from of course Scott@H-Tune

And a variety of colours too

Post by **indigolemon** » Thu May 30, 2013 11:47 am

US Ebay - if you buy non-oem try for one with more than one rubber o ring

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu May 30, 2013 11:48 am

Well time post Merlin - fresh from searching about the oil cooler seal (for JDM), I've just been searching for vtec solenoid valve and cam end seal leaks (for the UKDM) and was about to ask a question about the cam end seal

So question is, to replace the cam end seal you unbolt the 2 bolts on the top of it, lift the cover off and the seal comes out. Right?
No need to take the cam cover off?

Post by **indigolemon** » Thu May 30, 2013 11:50 am

Nope - cam cover comes off man. Sorry

Post by **Merlin** » Thu May 30, 2013 11:50 am

The cam cover needs to come off. I am looking at a few seals since I am about to replace my timing belt and the valve cover needs to come off anyway. I have some nice oil leaks on my 5th gen

Post by **Merlin** » Thu May 30, 2013 11:52 am

I see the Skunk2 one on Ebay.com ($30 ish before shipping). Does anyone have any links to others?

Post by **Merlin** » Thu May 30, 2013 11:55 am

Found one on the UK shop

http://www.skunk2.co.uk/product.php?mak ... LS&id=4850

Skunk2 £33 delivered or £12 OEM from Honda