4th gen halo headlights

night_51 · Post by **night_51** » Sat Jun 01, 2013 6:23 pm

Ye spot on

kris_aka_edu · Post by **kris_aka_edu** » Sat Jun 01, 2013 7:25 pm

I have sent you a PM mate

night_51 · Post by **night_51** » Sat Jun 01, 2013 7:28 pm

Replied.

Post by **NafemanNathan** » Sat Jun 01, 2013 7:58 pm

kris_aka_edu wrote:Right so I take it that the whole outer case smashed.. So really you could just put a case from an original light back on and it would fit normally? If that makes sense?

I wouldn't bank on it necessarily being that straight forward

night_51 · Post by **night_51** » Sat Jun 01, 2013 8:01 pm

I've measured it and seems ok. Just needs heating up a lil to losen up sealant

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Jun 02, 2013 10:11 am

It would be UK glass that it needs, rather then jdm plastic lense Edu.
There might also be a slight difference in the patternation on the lense too. E.g. going on the pics, the projector ones have 'blobs' top/bottom that aren't there on the standard lense so it would look a bitt different right/left and might have to swap a pair of lenses on to get it to look 'right'?

kris_aka_edu · Post by **kris_aka_edu** » Sun Jun 02, 2013 3:20 pm

Hmm. I didn't see this post earlier. I'm still thinking about it. If its going to be that much hassle then I don't know what to do.

night_51 · Post by **night_51** » Sun Jun 02, 2013 3:26 pm

I've checked the nights with my standard ones and can not see any difference!!!

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Jun 02, 2013 5:23 pm

Weird? The blobs you can see in the pics definitely aren't on my UKDM OEM headlight lenses.

Anyway, it is perfectly do-able, I didn't mean to put off a sale, just pointing out what's required.

To put these on a JDM car you'd need to get hold of UKDM sidelights and a replacement (or 2 replacement if they don't match) glass lenses.
Swap the lenses to get the new lights ready to go on, bumper off, old JDM one-pieces out, these headlights in, followed by UKDM sidelights, bumper back on. shimples

night_51 · Post by **night_51** » Sun Jun 02, 2013 7:38 pm

Ill have to have another look just my ludes in bits due to my gearbox goin. Am sure if they're replaced with normal lenses they'd be fine.