4g cornering lights

Post by **Drax** » Sun Jul 14, 2013 11:49 pm

does anyone know which bulb fits into a 4g cornering lights?

didnt even know i had them until recently, thought they were reflectors but when i looked at the fitments their a bit weird - will get pics up asap

The "S" express · Post by **honda-hardy** » Mon Jul 15, 2013 12:06 am

Does the fitting resemble the 501 push in bulbs like the side lights but about 3 times the size? If so i have 2 you can have. Prefer not to post them though.

The "S" express · Post by **honda-hardy** » Mon Jul 15, 2013 12:08 am

Are you going to James.s national meet?

Post by **NafemanNathan** » Mon Jul 15, 2013 8:39 am

Ask @bristol_bb4 to have a look at the ones I sold him.

I didn't think there was anything too particularly odd about them when I checked the bulbs for someone else.

Post by **Drax** » Mon Jul 15, 2013 9:43 pm

honda-hardy wrote:Does the fitting resemble the 501 push in bulbs like the side lights but about 3 times the size? If so i have 2 you can have. Prefer not to post them though.

not that i can see mate, yes im coming to national meet

NafemanNathan wrote:Ask @bristol_bb4 to have a look at the ones I sold him.

I didn't think there was anything too particularly odd about them when I checked the bulbs for someone else.

righto ill ask cheers!

this is what the connectors inside ive found look like but they dont look right....

defo there somewhere though

The "S" express · Post by **honda-hardy** » Mon Jul 15, 2013 10:09 pm

i see, your actually missing the light holders and loom too.

Dbo · Post by **Dbo** » Mon Jul 15, 2013 10:14 pm

i have a set in my garage somewhere

they have unpluged yours, there is a link between that and the bulb holder on the lens.
the bulbs in mine are bannet style twist in ones and the top 1/4 of bulb is painted silver

will try and dig them out if interested

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Jul 15, 2013 10:55 pm

Doh!

Been after the get up for these myself, didn't know there were any sets squirreled away!

Post by **Drax** » Tue Jul 16, 2013 3:42 pm

honda-hardy wrote:i see, your actually missing the light holders and loom too.

aye looks like it!

Dbo wrote:i have a set in my garage somewhere
they have unpluged yours, there is a link between that and the bulb holder on the lens.
the bulbs in mine are bannet style twist in ones and the top 1/4 of bulb is painted silver

will try and dig them out if interested

yes please mate, much appreciated!

Post by **NafemanNathan** » Tue Jul 16, 2013 4:01 pm

There should be two sub harnesses as well Drax. You disconnect the standard front indicator plugs and plug in the sub-harnesses. (One is very short, the other stretches across the lower member of the slam panel.

They're not the best, but for your reference here are the pics from when I removed mine...

Both ends of the long sub-harness...

The black box (part of the long sub-harness) that sat centrally on the lower member...

The short sub-harness...