1993 2.2 Japspeed Manifold & Power Flow Back Box fit 5g?

Lankysod07 · Post by **Lankysod07** » Thu Nov 26, 2015 12:53 pm

Seen a 1993 2.2 full exhaust system for sale with Japspeed Manifold and power flow back box, I mainly only want the manifold and downpipe but wondered if it would fit a 5g would it all be the same kit, with the engine being a h22?

jakeebbon · Post by **jakeebbon** » Thu Nov 26, 2015 1:14 pm

i would have thought they were the same if not minor bodging

Post by **ek9sid** » Thu Nov 26, 2015 3:46 pm

I believe it would with some minor tweaking to one of the rear hangers.

Post by **Merlin** » Thu Nov 26, 2015 4:22 pm

So long as you do not mix and match, a whole 4G exhaust system (manifold all the way to back box) will fit a 5th gen as there is no other fitment issue other than what ek9sid said.

Post by **NafemanNathan** » Thu Nov 26, 2015 4:27 pm

Is it definitely from a VTEC lude?

If it is the manifold and downpipe will fit yours, but you might have to play with cat/decat lengths to get the catback to fit. The hangers will need chopping and relocating as well.

Lankysod07 · Post by **Lankysod07** » Thu Nov 26, 2015 5:26 pm

Nice one guys, all I want is the mani and downpipe so defo worth it for £50

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Nov 26, 2015 7:10 pm

Manifold and downpipe are the same between 4g's and h22A5 5g's, but H22A8 5g's have different length downpipes.
Right, @Donald? (resident 5g exhaust expert...)

Post by **Donald** » Thu Nov 26, 2015 11:43 pm

Merlin is the expert

I only fitted a cat-back to my A8.

Post by **newkid** » Fri Nov 27, 2015 5:21 am

A8 = oddball off the exhausts. Different downpipe length, different cat length. Sure the catback size is the same tho. Catback size is based on @donald having no fitment issues swapping a 4g catback onto his A8 front setup.

Basically if you've got an A8 and want a decent mani/downpipe your swapping mani/downpipe/cat to ukdm length and not A8 length. Only thing with that is the standard catback will be holding you back so your just as well swapping the lot.

Lankysod07 · Post by **Lankysod07** » Mon Nov 30, 2015 12:35 pm

Managed to find a full exhaust setup in Newbury, reading that had a Japspeed manifold and downpipe, then a Powerflow back box with welded midsection all the way to the cat from a 4th gen.

I'm keeping the manifold and downpipe to bolt straight onto my 5th gen, but I now have a Power flow exhaust system up for sale for a 4th gen in awesome condition!

Ill make a parts for sale thread later on this evening with pics