both this bb4 did it plus Will's old silver lude did it toonewkid wrote:Shouldn’t beep if keys out bud. The beeps a warning to let you know you’ve left keys.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

That pi55 annoying "im open" door beeping noise
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- firstlude
- Posts: 998
- Joined: Sun Feb 08, 2015 9:41 pm
- My Generation: 4G
- Location: tiverton devon
- Been thanked: 5 times
i came across this kind of problem on a citroen xantia with the door open beeper going off even when key was out , found the fault to be the fact someone had changed the ignition lock and key but didnt have the new key programmed to the car so they had cut the old key up to retain the chip in it and taped it to the barrel inside the covers so it still got picked up by the pick up ring , thus the ecu thinks the key was always left in ............
success is the ability to go from one failure to the next without any loss of enthusiasm



- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
Wierd... Never seen a xantia that has a key in warning! However... I'm not up to speed with the series 2's, tbf...firstlude wrote:i came across this kind of problem on a citroen xantia with the door open beeper going off even when key was out , found the fault to be the fact someone had changed the ignition lock and key but didnt have the new key programmed to the car so they had cut the old key up to retain the chip in it and taped it to the barrel inside the covers so it still got picked up by the pick up ring , thus the ecu thinks the key was always left in ............
And yep, the key in beeper on jdm ludes is in the ICM.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
- JEBB4
- Supporter 2014
- Posts: 1239
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 89 times
- Been thanked: 75 times
Ahh it's the barrel sticking mate, if you pull the key out quick enough and feel a click it will go off I found, but if you don't feel the click it keeps beeping..
I remember it doing it when I was home..
I remember it doing it when I was home..
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- 4thgenphil
- Supporter 2016
- Posts: 6661
- Joined: Tue Aug 03, 2010 4:15 pm
- My Generation: 4G
- Location: filming two girls one cup 2
- Has thanked: 5 times
- Been thanked: 29 times
- Drax
- Moderator
- Posts: 6342
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 24 times
- Been thanked: 431 times
i didnt no sorry! ah ok, well that's two ludes with faulty ones thenNafemanNathan wrote:Did you see my reply Dan?
I thought you just wanted to stop it all together, but if it's a case that it's faulty (beeping when it shouldn't) I'd say you've got a faulty ICM (plastic box of tricks which is mounted on the back of the footwell fuse board. 3 screws to remove the fuse board.)

no worries bud, just want to cut the damn noise out asap as easy as possible lol!JEBB4 wrote:Ahh it's the barrel sticking mate, if you pull the key out quick enough and feel a click it will go off I found, but if you don't feel the click it keeps beeping..
I remember it doing it when I was home..
4thgenphil wrote:Mine died this, I just punch the bottom of the steering rack and it sorted it's self out


2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992

FOR PAUL

FOR PAUL
- Drax
- Moderator
- Posts: 6342
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 24 times
- Been thanked: 431 times
well i managed to get a chance and fix this last night WOOP WOOP!!!
Pushki's instructions told me of a black connector under the inner fuse box, behind the plastic tucked up against the carpret...and as i mentioned before i could only see a green one
so took the plastic off, unplugged this...

and took a gamble and cut the blue wire with white stripe and hey presto!!! beeping stopped!!

soooOOOOOOOOO thankful!! and thank you Pushki
but the instructions may need editing to do with the connector colour, ill see what colour the in Will's old lude is.
Pushki's instructions told me of a black connector under the inner fuse box, behind the plastic tucked up against the carpret...and as i mentioned before i could only see a green one

so took the plastic off, unplugged this...

and took a gamble and cut the blue wire with white stripe and hey presto!!! beeping stopped!!




soooOOOOOOOOO thankful!! and thank you Pushki

2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992

FOR PAUL

FOR PAUL
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times