Andreika609 4gen BB2 Value sports prelude

Andreika609 · Post by **Andreika609** » Tue Mar 05, 2019 8:18 pm

Painting car? Still not happening

well you remember i said tyres are going fast on the rear? So iv fixed it

And fully rebuilded rear chassis

still alot going on with the car , so will do a write up later

see ya

Jay · Post by **Jay** » Tue Mar 05, 2019 8:30 pm

Nice...

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Wed Mar 06, 2019 12:16 pm

Very nice!

(There is always a long list of stuff to be done on a car... You never reach the end of it!)

Post by **NafemanNathan** » Wed Mar 06, 2019 12:29 pm

wurlycorner wrote: ↑
Wed Mar 06, 2019 12:16 pm
(There is always a long list of stuff to be done on a car... You never reach the end of it!)

That's not entirely true

...

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Wed Mar 06, 2019 12:30 pm

tis entirely true - you never reached the end of the list of things you were going to do with that car... You just avoided the issue, by killing it instead!

Post by **NafemanNathan** » Wed Mar 06, 2019 12:36 pm

Andreika609 · Post by **Andreika609** » Wed Mar 06, 2019 7:12 pm

As winter come iv decided to work on ludes back. Car is in the garage last 11 winters

Iv took all out in couple hours and inspected what is wrong. Not much to work on as there is a few parts in the chassis.

Found one arm bent . And alignment bolts rusted in bushings badlly.

Bushings were burned out and made a new ones reinforced ones as i couldnt found any original to buy.

As you saw from another post iv started to paint all parts as all was out the car allready.

When all parts was painted and others covered in anti gravel paint started to work on the cars bottom.

Not many photos but here it is. Brushed , primed, 2 anti gravel coats and fresh black color to protect.

When its done all parts must go in

And on the wheels again

Oh and this snake left the car in same time

ABS and 4WS wires

All this cost me only 150 eur to rebuild it.

And its not over

still working on the car in other places , will let you know soon when im done

stay here

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri Mar 08, 2019 12:24 pm

That bent arm is a right shame!

The welded in bush... Is that because the replacement bush you found was a larger diameter than the original bush, so you had to drill out the hole size in the arm? (think that's what I can see in the pic).

Andreika609 · Post by **Andreika609** » Fri Mar 08, 2019 2:49 pm

There was a tube welded in and then presed a bushing in. Bushings i think for ford puma etc.

Andreika609 · Post by **Andreika609** » Fri Mar 08, 2019 7:48 pm

A litl teaser on what im working this winter

A full write up is coming soon

Lude Generation